EUROGAS are corrugated AISI 316L stainless steel PLT-CSST formable corrugated tubes from Eurotis, with a yellow LDPE protective coating conform to EN 15266 European standard suitable, for gas transport.

Available from DN12 to DN50, they comply with EN 15266 and are suitable for city, natural (methane) and LPG gas. PLT-CSST tube EUROGAS AISI 316L is also available in a version lined with "stellar coating". This type of sheath protects the tube, keeps it centered and prevents infiltration of gas into the wall cavities.

The special structure of the hose, resistant to pressure and deformation, allows easy and practical installation even in small spaces, limiting the use of fittings.

For safe installation, Eurotis has designed brass or nickel-plated brass fittings CW614N or CW617N.

In conjunction with Eurotis fittings, only NBR or HNBR gaskets according to EN 682 for gases supplied by Eurotis must be used to ensure a complete seal.

EUROGAS tubes provide for the use of the three Eurotis connection systems:

• Flanging system: the tightness is made possible using a plane gasket (PLTCSST
  tube need to be previously flanged;
• Press-fitting system: the tightness is assured thanks to the compression of the
  fitting (and the gasket inside it) on the PLT-CSST tube;
• Double o-ring system: the tightness is made possible using 2 o-rings (PLT-CSST
  tube don’t need to be flanged.

Eurotis also provides for the use of specially designed brass fittings to facilitate installation and ensure the system's tightness.