Our aluminum heat transfer plates are used for installing floor and wall heating systems with the use of dry technology. Heat transfer plates are an integral elements of heating systems based on EPS boards, acoustic boards and chipboards.

Aluminum heat transfer plates allows the heat to spread effectively across the heating area. Thanks to it’s special shape heat transfer plates act as pipe mounting elements.

From now on, you can order our product both in the previous variants (length 1000 mm) and in the new solution - length 🔺1150 mm🔺 This is a long-awaited novelty for many of our contractors.

The system in which instead of foil and clips, a castellated board with tabs is
used. It allows you to lay a pipeline of any shape while maintaining appropriate
distances. Regular and numerous tabs, appropriately shaped, keep the heating
pipes in place. These mats are made of deeply pressed, 1 mm thick layer of
polystyrene.

Modern design and a change of concept from the
traditional system turnstile with vertical axis on
the roller system, makes easier and faster exploitation
of the decoiler. It also contributed to the
reduction of the dimensions of the device itself.
For example, the new design allows one person to
load 600 m of Φ16 x 2.0 mm pipe coil on the decoiler.
Additionally, the decoiler is easily transported
from construction place to another construction
place, thanks to the fast folding of a mechanical
structure.

SYSTEM BOARDS WITH FULL-SURFACE ALUMINIUM FOIL COATING

The system boards made of high-density, compression-resistant expanded
polystyrene (EPS) serve as the supporting element for underfloor heating pipes. The boards are laminated with 100-200 micron aluminium layer, which
acts as a heat sink, transferring heat from the pipe surface. It distributes
heat evenly across the board surface to ensure optimal thermal comfort.

Our aluminum heat transfer plates are used for installing floor and wall heating systems with the use of dry technology. Heat transfer plates are an integral elements of heating systems based on EPS boards, acoustic boards and chipboards.

Aluminum heat transfer plates allows the heat to spread effectively across the heating area. Thanks to it’s special shape heat transfer plates act as pipe mounting elements.

From now on, you can order our product both in the previous variants (length 1000 mm) and in the new solution - length 🔺1150 mm🔺 This is a long-awaited novelty for many of our contractors.

The system in which instead of foil and clips, a castellated board with tabs is
used. It allows you to lay a pipeline of any shape while maintaining appropriate
distances. Regular and numerous tabs, appropriately shaped, keep the heating
pipes in place. These mats are made of deeply pressed, 1 mm thick layer of
polystyrene.

Modern design and a change of concept from the
traditional system turnstile with vertical axis on
the roller system, makes easier and faster exploitation
of the decoiler. It also contributed to the
reduction of the dimensions of the device itself.
For example, the new design allows one person to
load 600 m of Φ16 x 2.0 mm pipe coil on the decoiler.
Additionally, the decoiler is easily transported
from construction place to another construction
place, thanks to the fast folding of a mechanical
structure.