The Winterwarm ACM air curtain is a perfect solution to separate a heated area from the outside or another building which is not heated. The heat loss is reduced significantly when an ACM is installed. Every ACM has a innovative "Gurney"-flap. This flap guides the air flow in such a way that the majority of warm air stays within the heated area.

The ACM is a modular air curtain assembled of units of 50 cm. Creating a perfect seperation between the warm inside air and the cold, polluted outside air. 

A complete generation condensing unit air heaters which combines the efficiency of gas fired unit air heaters with energy savings and high comfort. All Winterwarm HR heaters are  ErP-compliant.

The HR heaters are provided with new innovative controling technology which enables the heaters to be connected to a BMS, to combine different applicances, to be controled by mobile device, status read out from a distance, etc.

• High efficiency
• ErP 2021 compliant
• 9 capacities 10-120 kW
• Modulating burner and fan
• Energysaving
• Compact
• Low weight

The WWH is an indirect fired unit air heater that can heat a room optimally because of the sophisticated design and a thought through combination of fan, heatexchanger and discharge possibilities. The WWH can be connected to any central heating system, heat pump or district heating system and is suitable for heating any kind of area, such as showrooms, warehouses, factories and bigger commercial properties.

The WWH-range consists of 4 different series with their own unique characteristics: WWH-basic unit for heating with standard water temperatures, WWH - EC with low electricity consumption and very silent, WWH-LT for extra capacity with low water temperatures, and the WWH-Plus for heating with low water temperatures ánd cooling in the summer.

Heating of high areas is a challenge? Not with the Winterwarm JET. This air heater is
specially designed to transport warmth from underneath high ceilings downward toward
the floor and to keep it there. The unit is equipped with an air discharge module with
special nozzles that move 7 to 10 times more air than a unit without a discharge module
would do. This way, the warm air is efficiently spread downward in four directions.

The temperature difference between the ceiling and the floor remains minimal so heat loss through the roof is reduced as much as possible. This way energy savings up to 30% can be realised while maintaining comfort. Suitable for areas between 5 and 16 metres heigth. Especially designed for optimal operation with low water temperatures, like in combination with a heat pump or district heating.

Die Qwikshift Hybridheizung ist die neueste Lösung für die nachhaltige Beheizung von Gewerbehallen, Geschäften und Lagern. Eine Wärmepumpe kombiniert mit innovativer Booster-Technologie, entweder 100% elektrisch oder kombiniert mit Gas.

Das System besteht aus drei Komponenten: der Wärmepumpe, dem Innengerät mit Booster und dem Smart Controller. 

Der Raum wird schnell aufgeheizt mit dem Booster der auch an den kältesten Tagen des Jahres mithilft. Die Wärmepumpe deckt den Wärmebedarf zu etwa 70% der Zeit. An heißen Tagen kann sie sogar kühlen. Eine nachhaltige und effiziente Heizung mit höhem Komfort für die Mitarbeiter.

Dieses hybrides Heizungssytem bringt bis 60% Einsparungen vom Energieverbrauch entlang und bis zu 70% niederiger CO2 Emissionen. Und last but not least ist der gasbefeurte Variant auch schon hydrogen ready (20%).

Sehen Sie sich den Qwikshift an auf https://www.qwikshift.nl/de