OAS I/O WEB Module Configurator

The OAS I/O WEB Module Configurator is based on the OASModbusUtilitiesAsync software module. 

Simple, transparent, effective. The SBS I/O fieldbus modules enable the connection of digital or analog input and output values with the Modbus protocol. All necessary communication settings are made simply, transparently and effectively with the OAS I/O WEB Module Configurator. 

The OAS I/O WEB Module Configurator is used to configure communication with the controller in automatic mode via the RS 485 interface. The OAS I/O WEB Module Configurator is therefore also a key to integrating the I/O fieldbus modules into the Niagara platform. The configurable settings depend on the respective type of fieldbus module: digital or analog - depending on the type of inputs and outputs, the color change and LED color for signaling active digital inputs and outputs can be set, the switchover between normally open and normally closed, the feedback protection, the activation of the safe position in the event of faults in the bus system, the setting of analog characteristic curves, etc.

All communication settings are configured conveniently and semi-automatically via the OAS I/O WEB module configurator on the Niagara automation platform.
Configuration, monitoring and control of the inputs and outputs is carried out in automatic mode via the RS 485 interface. 

The 4 updates of the OAS I/O WEB Module Configurator

Big news for our OAS I/O WEB Module Configurator! We are pleased to present you exciting updates:

Integration of the SBS IOM I/O modules: Now you can use the OAS-SBS-IOMR-1026 and OAS-SBS-IOMR-1031 modules directly in our configuration software.

Modbus TCP: The configurator is now TCP/IP-capable and compatible with the Modbus TCP gateway.

I/O Test: With the I/O Test you can test all modules bidirectionally, perform switching operations and check messages.