FilterBall valve

Zone valves or diverting valves allow automatic shutdown of air conditioning or hydraulic and domestic water medium systems. This specific series of high hydraulic performance horizontal valves, combined with size reduction and field utility, make them particularly suitable for zone heating systems.

Actuators are used together with matching valves, used to automatically adjust the flow direction and the system opening and closing in the air conditioning system or indoor water system.
The new TS actuator is designed to operate a rotary mixing valve DN15-32. Rotating angle range is 60 or 90°, the series can be used for 2-point, 3-point and 0-10V control signals, some models can be easily manually operated by the button on the front of the actuator.

The thermostatic mixing valve is used in systems that produce domestic hot water. It is designed to maintain the preset temperature of the mixed water delivered to the user outlet, when there are variations in the temperature and pressure of the hot and cold water at the inlet, or in the drawn-off flow rate.These devices are also available with fittings complete with strainers and check valves on the hot and cold water inlets.

The thermostatic mixing valves can be deleivered as complete valve groups including safety valves, mixing valves and shut off valves.

Gas separators are used to continuously remove the air contained in the hydraulic circuits of heating and cooling systems, down to micro-bubble level.
The circulation of fully deaerated water enables the systems to operate under optimal conditions, free from any noise, corrosion, localised overheating or mechanical damage.

TS has developed special gas separator assemblies for use in monobloc Air-Source heat pumps charged with R290. If an internal leakage occurs in the heat pump does the gas separator prevent refrigerant from entering the house via the heating circuit.

Zone valves or diverting valves allow automatic shutdown of air conditioning or hydraulic and domestic water medium systems. This specific series of high hydraulic performance horizontal valves, combined with size reduction and field utility, make them particularly suitable for zone heating systems.

Actuators are used together with matching valves, used to automatically adjust the flow direction and the system opening and closing in the air conditioning system or indoor water system.
The new TS actuator is designed to operate a rotary mixing valve DN15-32. Rotating angle range is 60 or 90°, the series can be used for 2-point, 3-point and 0-10V control signals, some models can be easily manually operated by the button on the front of the actuator.

The thermostatic mixing valve is used in systems that produce domestic hot water. It is designed to maintain the preset temperature of the mixed water delivered to the user outlet, when there are variations in the temperature and pressure of the hot and cold water at the inlet, or in the drawn-off flow rate.These devices are also available with fittings complete with strainers and check valves on the hot and cold water inlets.

The thermostatic mixing valves can be deleivered as complete valve groups including safety valves, mixing valves and shut off valves.