Thermostatic mixing valves

FilterBall valve is a ball valve with an integrated filter suitable for heating, cooling and tap water systems. The filter is easy to clean, just close the ball valve, unscrew the lid and remove the filter.
The valve requires no maintenance, but the installation should still be checked regularly.

Zone valves or diverting valves allow automatic shutdown of air conditioning or hydraulic and domestic water medium systems. This specific series of high hydraulic performance horizontal valves, combined with size reduction and field utility, make them particularly suitable for zone heating systems.

Actuators are used together with matching valves, used to automatically adjust the flow direction and the system opening and closing in the air conditioning system or indoor water system.
The new TS actuator is designed to operate a rotary mixing valve DN15-32. Rotating angle range is 60 or 90°, the series can be used for 2-point, 3-point and 0-10V control signals, some models can be easily manually operated by the button on the front of the actuator.

Gas separators are used to continuously remove the air contained in the hydraulic circuits of heating and cooling systems, down to micro-bubble level.
The circulation of fully deaerated water enables the systems to operate under optimal conditions, free from any noise, corrosion, localised overheating or mechanical damage.

TS has developed special gas separator assemblies for use in monobloc Air-Source heat pumps charged with R290. If an internal leakage occurs in the heat pump does the gas separator prevent refrigerant from entering the house via the heating circuit.

FilterBall valve is a ball valve with an integrated filter suitable for heating, cooling and tap water systems. The filter is easy to clean, just close the ball valve, unscrew the lid and remove the filter.
The valve requires no maintenance, but the installation should still be checked regularly.

Zone valves or diverting valves allow automatic shutdown of air conditioning or hydraulic and domestic water medium systems. This specific series of high hydraulic performance horizontal valves, combined with size reduction and field utility, make them particularly suitable for zone heating systems.

Actuators are used together with matching valves, used to automatically adjust the flow direction and the system opening and closing in the air conditioning system or indoor water system.
The new TS actuator is designed to operate a rotary mixing valve DN15-32. Rotating angle range is 60 or 90°, the series can be used for 2-point, 3-point and 0-10V control signals, some models can be easily manually operated by the button on the front of the actuator.