Der HANSA AIRTENA WärmepumpenHUB macht Ihre Heizungsanlage fit für die Wärmepumpe.
Der HANSA AIRTENA WärmepumpenHUB ist universell 
im Neubau wie im Gebäudebestand einsetzbar und ermöglicht in der Übergangsphase bis 2045 den Weiterbertrieb des konventionellen Heizgerätes parallel mit der 
Wärmepumpe. Darüber hinaus können vorhandene regenerative Wärmequellen wie z.B. eine thermische Solaranlage oder ein Holzkessel weiter genutzt werden.
Auch nach 2045 ist der HANSA AIRTENA WärmepumpenHUB die richtige Wahl, weil er optimal für den Heizbetrieb und die Warmwasserbereitung mit Wärmepumpe konzipiert ist.
Mit einer Breite und Tiefe von 60 cm, sowie einer Höhe 
von 130 cm findet die HANSA AIRTENA Inneneinheit in 
jedem Haushalt Platz. Zusätzliche Speicherbehälter für 
Heizung und oder Warmwasser werden nicht benötigt.
Die AIRTENA Luft-Wasser-Wärmepumpe von HANSA 
steht für eine effiziente und nachhaltige Wohnraumbeheizung und Trinkwarmwasserbereitung in Ein- und 
Zweifamilienhäusern. Bis zu über 80 Prozent der Wärme für Heizung und Trinkwarmwasser entnimmt die 
HANSA Wärmepumpe der Luft, welche unerschöpflich 
und kostenlos zur Verfügung steht. 
Das innovative HANSA AIRTENA WärmepumpenHUB 
wurde für die Installationen im Altbau als auch im 
Neubau konzipiert. Es eignet sich für den Betrieb an 
Bestandsanlagen mit Heizkörpern, als auch mit Fußbodenheizungen.

HSP fan-assisted gas burner
The HSP series represent an improvement over the HANSA pre-mix gas burners with full gas-air modulation. They have been tested to DIN EN 676, fall below emissions class 3 and are suitable for the combustion of natural gas (H/L 10/50 mbar) and propane gas.
The pre-mix gas burner features stepless adjustment between 20 kW and 70 kW and is easy to install. Efficient speed control keeps the power consumption of the HSP burner low, making it extremely attractive for end customers.
All HSP gas burners are characterised by low NOx and CO values, high robustness to gas pressure fluctuations and extremely smooth running properties. They can be operated even at low gas inlet pressures.
Function checks and troubleshooting feature digital readout to simplify handling. Highly stable pressure, good starting characteristics and low-noise operation round out the advantages.

5 Series Fan-assisted oil burners
5 Series fan-assisted oil burners are characterised by very smooth running and environmentally-friendly combustion. They are tested and approved according to EN 267 of the 1. BImSchV, suitable for the combustion of heating oil EL according to DIN 51603 with max. 6.0 cSt/293 K (50 °C).
The inbuilt oil pre-heater system ensures a uniform fuel temperature and optimum atomisation of the fuel. The air choke prevents fast cooling of the combustion chamber in case of standstill of the device. An optimised high-performance fan guarantees a safe startup and a stable combustion. The air regulation at the suction and discharge side permits precise setting of the air volume even in the lower power range and the precision mixing system ensure simple but precise setting of the oil-air mixing ratio. Furthermore, the patented quick closure system, the practical maintenance positions and the variable installation depth is guarantee easy handling by means of a standard sliding flange.

The solid condensing boilers of the HANSA Integra series have proven themselves in the market and offer their long-lasting, sustainable heating technology - variably applicable.   Whether for oil or gas combustion, modernization or new construction, with or without deep storage, the Integra condensing boilers offer a variety of combination options and are thus the almost perfect solution for 99% of all households.   The boilers combine sophisticated technology and design and adapt to individual customer needs and requirements.   The Integra condensing boilers are equipped with sustainable high-performance cast iron boiler units and a high-quality downstream stainless steel heat exchanger. Due to the high stainless steel alloy, the heat exchanger is extremely corrosion resistant and robust. The scope of delivery also includes weather-compensated 2-point control, insulation paneling, safety thermostat, manifold and safety group.   The reliable oil burners (blue burners) or gas blower burners complete the package (optionally available as comfort version with 2-stage blue burner for an extra charge)   The room-air-independent operation guarantees quiet, insulated operation with high efficiency.   A long life through the careful processing is guaranteed. Warmth to feel good - Made in Germany!   The devices of the Integra series convince not only with energy efficiency but also with an excellent price-performance ratio when buying.   The tip boilers save heating costs with low-emission combustion and an efficiency of up to 103% can be achieved, depending on the system configuration.   In addition, the device's user-friendly accessibility enables easy handling in service with full access to the heating circuit manifold with integrated mixer and heating circuit, as well as to the inspection cover of the stainless steel heat exchanger.   The maintenance of the system is considerably simplified and thus the maintenance costs are significantly reduced. Feedback geben Verlauf Gespeichert Community

• cast iron boiler
• Design housing
• Burner (gas or oil)
• high quality exhaust gas heat exchanger made of stainless steel
• Weather-compensated regulation

The new TANTUM gas-condensing device meets all the requirements of modern gas-condensation technology and excels with its high value for money. HANSA has also equipped it with a reliable, high-quality stainless steel heat exchanger and high-quality components. The device boasts a very user-friendly design with a sleek, straightforward construction with any extra frills.

The new, compact HANSA TANTUM gas condensing device perfectly accommodates most customer needs in terms of heat and hot water output. Whether for an apartment or your own home, a new home or renovation project, the space-saving dimensions mean that the device can be set up even in the smallest of spaces.

TANTUM excels when it comes to quality and value for money. The heat exchanger is made of high-quality stainless steel, the components are from reputable manufacturers and it is manufactured in Germany! As a result, HANSA guarantees a long-service life and stability as well as solid technology at a revolutionary price!

The device is readily accessible from the front, all parts are clearly arranged and easy to reach. The connections are easy to find and can be plugged together, which prevents installations errors. The control unit features straightforward design and is easy to operate.

The sophisticated gas/air ratio, the devices are factory preset, which facilitates commissioning and monitoring results. The expansion vessel (10 l) is already integrated.   

This ensures that it can be quickly and easily mounted and serviced; costs of maintenance are also reduced.

The device is very smooth running thanks to the sound-proofed housing and operation at the lowest output. 

The use of modern gas condensing technology saves heating costs with low-pollution combustion and, depending on the how the system is configured, efficiency of 108% can be achieved.

• Output range of 4.0 – 24.7 kW
• Modulation range 1:6
• High-quality stainless steel heat exchanger
• Includes a weather-compensated control and expansion vessel
• Compact dimensions
• Quiet operation with sound-proofed housing
• User-friendly mounting and service 
• Equipped with high-quality components – Made in Germany