TurbuFlexS
Increase energy efficiency - reduce costs
Enormous amounts of heat are generated in domestic or commercial boilers, combustion plants and industrial processes. The waste heat is released into the atmosphere via the chimney.
Part of the generated energy remains unused and is lost!
Heat exchangers make it possible to transfer heat from a warm medium to a colder medium. In the Turbu-FlexS AWT, the exhaust gas is led past a coil and heats the water conducted into the coil windings. The bimetallic baffle plates inside the coil cavity deflect the hot exhaust gases several times. The heated water raises the boiler return temperature or can supply individual consumers directly with hot water.
Schräder supplies the technology that not only reduces your costs, but also contributes to the reduction of emissions and thus to active environmental protection.
The three product variants TurbuFlexS-300, TurbuFlexS-600 and TurbuFlexS-900 are available. All have a DN200 stainless steel exhaust pipe with a material thickness of 1.5 mm. The inlet pipe is wide in the standard version and the outlet pipe is narrow so that the exhaust heat exchanger can be installed like a standard exhaust pipe. Several heat exchangers can also be combined in a series or parallel connection. The designs can be flexibly adapted to customer-specific requirements.
Your benefit:
- Reduce costs
- Use energy reserves
- Protecting the environment
TurbuFlex advantages:
- Hot water in a short time
- Universally applicable
- For solid, liquid and gaseous fuels
- Little space required
- Vertical, horizontal or oblique mounting
- Low installation effort
Examples of heat sources:
Heating boilers with fuels: wood chips, logs, pellets, oil, gas, coal
Firing systems: wood-burning stoves, heating inserts, tiled stoves, hot-air stoves, baking ovens, pizza ovens, drying systems, roasting systems, kitchen blocks, process heat generation systems
