Mobile Boilers intended as temporary heaters - Can withstand outdoor use IP44.

Our efficient EP E electric boilers are perfect for radiator heating, additional heating, and industrial processes.

The EP E-series pressure vessel is made of sheet steel and approved for 4 bar operating pressure. The immersion heaters are made of stainless steel with a brass head. Connection for flow/safety line and return line as well as drain tap is located on the back of the boiler.

The height is only 78 cm, the width 28 cm, and the depth 63 cm. Despite this, there is plenty of space for electrical connection under the boiler lid where the electronics are collected.

Our EP series, boilers for waterborne heating systems and industrial processes, are available in 31 different power sizes from 31 to 1500 kW. The power of the boilers is divided into 7, 15, or 30 steps and is controlled according to the heat demand.

As fossil fuels are phased out for other heating alternatives, the need for reliable backup systems also increases. Then our EP series is perfect.

The boilers are supplied with a thermostat for keeping the flow temperature constant. To increase the life of the boiler's contactors, the boilers have a smart temperature control that adapts the power step-in.

Electric heaters are an economical and safe choice that fits most boilers and accumulators.

MP4 / MP6 G2

Perfect for apartments, holiday homes, conservatories, extensions, sheds, garages, etc.

Our popular mini boilers are perfect for underfloor heating and low-temperature systems in extensions and conservatories up to 150 m². Others also use our mini-boilers to heat the Attefallshuset, the holiday home, or a detached garage in a simple way.

They are compact with small outer dimensions which makes them easy to place. The power of the boilers (4.5 or 6 kW) roughly corresponds to the heat demand up to 80-150 m² of living space, depending on insulation and ventilation.

MP4 & MP6 are delivered completely complete. Only water and electricity need to be connected, then they are ready for use. An outdoor temperature compensator ensures that the temperature outdoors regulates the boilers. The room unit is available as an accessory.

Thermo Flow

Thermo Flow is an electric boiler without a built-in water heater or a heat exchanger for hot water. It can be used for all kinds of heating, a common area of ​​use is water-borne underfloor heating.

Thermo Flow is a wall-mounted electric boiler with an output of 11 kW. The boiler is, just like Elomin III, "climate-controlled", which means that the temperature outside controls how much heat the boiler emits. When there is no need for heating, the boiler switches off automatically. The circulation pump is exercised at regular intervals during the summer months so as not to jam when autumn comes. Thermo Flow has frost protection and a room thermostat is available as an accessory. The bypass valve extends the life of the boiler and provides safe operation.

Thermo Flow is delivered complete. Only water and electricity need to be connected, then the system is ready for use.

The load monitor in seven steps protects the house's main fuses. The function temporarily limits the boiler's power when, for example, a washing machine, dryer, or stove is in operation at the same time as the boiler.