Baby Changing Stations
ADA Standards.
International Code Council [ ICC ] A117.1 Standards.
2012 Texas Accessibility Standards.
One-piece, deep-drawn, uniform grain Stainless steel exterior. Luxury looks at any washroom.
Surface Wall Mounted or Recessed Wall Mounted.
Easy to load and use dual-cavity dispenser for sanitary bed liners and diaper disposal bags.
Available an additional wall-mounted bag hook to make accessing diaper bags easier and safer.
Polypropylene bed surface including odor-causing bacteria reduced technology.
Work surface is not higher than 34" [ 863 MM ].
This Baby Changing Station has been tested to support 200 lbs with minimal deflection.
Please note: This product is designed for infants only, up to 3.5 years of age and weighing less than 50 lbs.
Unit Dimensions: 26 7/32” W x 41 5/16″ H (666 mm x 1050 mm)
Depth [ closed ] 2 23/32” (69 mm)
Extension [ open ] 32 27/32”(834 mm)

Motor Type:

DC Motor, 1400 RPM, 0.5 W
Voltage (-1): DC 6V [ 4Pcs AA / LR6 Alkaline Battery ]
Voltage (-2): Optional Plug in AC Adapter on 120V - 240V
Capacity: 1200 ML [ 40.5 OZ ]
Dose/Pump: 1.0 ML [ 0.034 OZ ]
Sensor Range: 3 -10 CM
Battery Life: 50,000 Cycles
Room Temperature: 5 - 40oC [ 41 - 104oF ]
Drop Type: Gel Soap or Sanitizer
Foam Type: Gel Foam Soap
Spray Type: Medical Alcohol Liquid
Alcohol Content: 80% [ Maximum ]
Density: 0.9 - 1.35 Kg/Dm3
Viscosity: 550 - 2,500 Cps
Body Material: Stainless Steel or ABS plastic
Do Not Use: Soap or Sanitizer contains chlorine or solid or abrasive particles

Automatic JetBlade Hand Dryer
Voltage (~1): 230V 50/60Hz, 7.6A, 1750W
Voltage (~2): 120V 60Hz, 14.5A, 1750W
Air Temperature: 40℃ [ 104℉ ]
Air Flow: 132M3/H [77.5CFM ]
Air Velocity: 160M/Sec [ 492 FT/S ]
Drying Time: 8 to 10 Seconds
Protection Level: IP23
Electrical Isolation: CLASS Ⅱ
Dimension: W297×D195×H671MM
Body Material: ABS Plastic
Brushless Motor: 35000RPM,1350W[1.81HP]
[1] Blue LED Light At Drying Cavity
[2] UVC Lamp At Air Inlet
[3] Coarse Particulate&HEPA Filter
[4] Hand Dryer Power ON/OFF Switch
[5] Speed&Sound Control Switch
[6] Heat Element ON/OFF Switch
[7] 25 Seconds Automatic Shut Off
[8] Over 25℃Heat Element Shut Off

Jet Hand Dryer
Voltage: 230V/50Hz, 4A, 1000W
Air Temperature: 40℃
Air Velocity: 100M/S
Protection Level: IP23
Electrical Isolation: CLASSⅠ
Finished: Brushed, Polished, Black, etc.
Dimension: W286×D102×H321MM
Material: Stainless Steel 304
Motor: Brushless Motor, 42,000RPM
1. Visible Service Blue LED Light
2. HEPA Filter Included
3. ON / OFF Heat Element Swtich
4. Stepless Speed & Sound Control

Paper Dispenser
Dimensions:W255×D120×H260MM
Body&Lid Thickness: 0.8MM
Axis Thickness: 0.8MM
Tissue Capacity: Max.Dia.230MM
Tissue Roll Width: Max.115MM
Tissue Roll Tube: Dia.45& 70MM
Finished: Brushed, Polished, Black, etc.
Material: Stainless Steel 201 or 304
Remark: Lockable