Unibox

Our thermostatic valve makes hydronic balancing easy.

You want to optimise your existing heating system in terms of volume flow, system efficiency and energy consumption? Q-Tech is the pioneering solution for this: withthe AQ thermostatic valves you can carry out automatic hydronic balancing directly at the radiator.

With the new AQH thermostatic valves with even wider flow ranges, you can now also carry out automatic hydronic balancing in cooling systems.

You can now easily retrofit and renovate existing systems with the Q-Tech valves, because you dont't have to go the trouble of calculating preset values. For you this means: a reliable solution even if existing pipeworks are unknown.

The Q-Tech valve inserts find their place in many other components of the product familiy. This means you can use this technology in underfloor heating systems. With the automatic hydronic balancing, you keep the volume flow in the system constant even if the differential pressure fluctuates. This saves energy, retains optimum room temperatures and eliminates flow noises. With the Q-Tech you can easily bring heating systems back into balance.

Hygienic potable water?
Reliable control.

Our Regumaq X fresh water stations heat potable water exactly when it is needed. This continuous flow principle is particularly hygienic - because when hot potable water is stored, large quantities of germs can develop, such as the dangerous legionella bacteria.

Regumaq fresh water stations are available in three variants with different performance levels. This means you have the right solution for every situation, from detached houses to multiple dwellings or non-residential buildings. If you want to plan potable water distribution and hygiene holistically, then our modular Aquanova system is the right solution - the Regumaq fresh water stations function reliably as part of the system.

You can adjust the discharge capacities and the required excess temperatures individually to the system parameters. This makes the Regumaq fresh water stations the pioneering solution for low temperature systems and systems with regenerative energy concepts. The discharge capacity can be increased – for example in the case of special requirements or changes in use - by connecting stations in parallel. Discharge capacities of up to 500 litres per minute are then possible.

Energy turnaround in five words: Gas boiler out, Regudis in.

The modernisation of heating systems is the big challenge for the next few years. In existing buildings, gas boilers can best be replaced with dwelling stations. Conversion to central heat generation in combination with decentralised dwelling stations is economical and efficient. Central heat generation is future-proof as renewable energies - such as district heating or heat pumps - can be integrated more easily. Electronically controlled dwelling stations are more efficient than hydraulic ones.

The efficient solution: our electronically controlled Regudis W-HTE GT

We have a quick, clean and efficient solution for replacing gas boilers: our electronically controlled Regudis W-HTE GT dwelling station is easy to install in just one hour – even in existing buildings. With a width of 440 mm, it fits exactly in the place of the old gas boiler. And the precisely fitting surface-mounted bonnet is included.

You can simply use existing connections for hot and cold water and heating circuit supply and return – because the connections of the Regudis W-HTE GT are arranged in the same way as those of the most common gas boilers. This allows you to connect without a junction. The connection to and from the buffer storage cylinder is made from the top via the chimney. And commissioning is just as easy as you are used to with the Regudis W-HTE dwelling station.

You have an installation situation with critical water conditions? That's why we offer the heat exchanger with Sealix® protective layer

One system solution for all challenges: our Regudis W-HTE dwelling stations

With the Regudis W-HTE - our dwelling station - you control hot potable water preparation in a modern way: Decentralised hot potable water preparationwith dwelling stations is considered a small system. Therefore, it does not fall under the obligation to test for legionella according to the Potable Water Ordinance. Decentalised hot potable water preparation is considered particularly hygienic - and you are on the safe side.

Our Regudis W-HTE is a pioneering system solution. That means for you: you only need to be familiar with one product and can extend it by modules. This allows you to adapt the station to new applications or add further functions, for example with our instantaneous water heater module or our Duo heating circuit separation module. We also make installation easy for you: the Regudis W-HTE is clearly structured so that you can install it quickly.

Our Regudis W-HTE also leads the way in terms of hydraulic key figures: the Regudis W-HTE is currently the benchmark in terms of pressure loss, discharge capacity and the low system temperatures required - other products on the market do not achieve these values. Together with a smart insulation concept, our dwelling stations ensure energy-efficient operation of the system and a high level of comfort for your customers.

A modular system solutions, many possibilities for room temperature control

Your customers want to enjoy the comfort of surface heating and cooling?

With our ClimaCon F room thermostats, we provide you with a system solution that is easy to install and quick to configure.

This means that you always have exactly the solution your customers need: From a simple room thermostat that controls the temperature - to a digital solution for heating and cooling that can be operated via app. Comfort is always included : even the simple model variant can be regulated to the exact degree. Our ClimaCon F room thermostats are also suitable for operation with heat pumps.

Our ClimaCon F system solution is suitable for detached houses and dwellings - and is easy to retrofit. Its new, independent design shows what modern building technology can look like.

Our thermostatic valve makes hydronic balancing easy.

You want to optimise your existing heating system in terms of volume flow, system efficiency and energy consumption? Q-Tech is the pioneering solution for this: withthe AQ thermostatic valves you can carry out automatic hydronic balancing directly at the radiator.

With the new AQH thermostatic valves with even wider flow ranges, you can now also carry out automatic hydronic balancing in cooling systems.

You can now easily retrofit and renovate existing systems with the Q-Tech valves, because you dont't have to go the trouble of calculating preset values. For you this means: a reliable solution even if existing pipeworks are unknown.

The Q-Tech valve inserts find their place in many other components of the product familiy. This means you can use this technology in underfloor heating systems. With the automatic hydronic balancing, you keep the volume flow in the system constant even if the differential pressure fluctuates. This saves energy, retains optimum room temperatures and eliminates flow noises. With the Q-Tech you can easily bring heating systems back into balance.

Hygienic potable water?
Reliable control.

Our Regumaq X fresh water stations heat potable water exactly when it is needed. This continuous flow principle is particularly hygienic - because when hot potable water is stored, large quantities of germs can develop, such as the dangerous legionella bacteria.

Regumaq fresh water stations are available in three variants with different performance levels. This means you have the right solution for every situation, from detached houses to multiple dwellings or non-residential buildings. If you want to plan potable water distribution and hygiene holistically, then our modular Aquanova system is the right solution - the Regumaq fresh water stations function reliably as part of the system.

You can adjust the discharge capacities and the required excess temperatures individually to the system parameters. This makes the Regumaq fresh water stations the pioneering solution for low temperature systems and systems with regenerative energy concepts. The discharge capacity can be increased – for example in the case of special requirements or changes in use - by connecting stations in parallel. Discharge capacities of up to 500 litres per minute are then possible.

Energy turnaround in five words: Gas boiler out, Regudis in.

The modernisation of heating systems is the big challenge for the next few years. In existing buildings, gas boilers can best be replaced with dwelling stations. Conversion to central heat generation in combination with decentralised dwelling stations is economical and efficient. Central heat generation is future-proof as renewable energies - such as district heating or heat pumps - can be integrated more easily. Electronically controlled dwelling stations are more efficient than hydraulic ones.

The efficient solution: our electronically controlled Regudis W-HTE GT

We have a quick, clean and efficient solution for replacing gas boilers: our electronically controlled Regudis W-HTE GT dwelling station is easy to install in just one hour – even in existing buildings. With a width of 440 mm, it fits exactly in the place of the old gas boiler. And the precisely fitting surface-mounted bonnet is included.

You can simply use existing connections for hot and cold water and heating circuit supply and return – because the connections of the Regudis W-HTE GT are arranged in the same way as those of the most common gas boilers. This allows you to connect without a junction. The connection to and from the buffer storage cylinder is made from the top via the chimney. And commissioning is just as easy as you are used to with the Regudis W-HTE dwelling station.

You have an installation situation with critical water conditions? That's why we offer the heat exchanger with Sealix® protective layer