With the help of the oscillator used by the Technowell
ultrasonic humidifier introduces water particles smaller
than 10 m (3-5 m on average) into the air to increase
ambient humidity by creating a more balanced
moisture environment.

When low humidity levels are needed, our devices save energy in humidity control
by using a desiccant wheel style heat exchanger. With its silica gel wheel and
channels on the drum, it achieves precise humidity control by highly efficient
adsorption. Even after 8 years of use, the silica gel wheel still retains 90% of its
dehumidification capability.

With its long wheel life, durable layout, low energy consumption, and high drying
capacity, Desiccant Wheel Type Dehumidifiers are strong dehumidifiers suitable for
all environments.

It comes with a built-in temperature sensor, humidity sensor and a touch control
panel for real-time monitoring.

Advanced technology has been used to develop a heating system with controlled
regenerative heat that can save up to 30% on electricity consumption. To enable air
duct connection easier, the dehumidifier's air inlets and outlets comply with the
ISO7807 duct connection standard.

The adiabatic or the other name evaporative
humidification is performed by the high-pressure
humidification unit, which is one of the product
types used to satisfy the humidification need in
the air handling unit. The aim is to raise the relative
and absolute humidity of the environment fed by
the air handling unit. There are solutions such as
steam, honeycomb and high pressure
humidification to meet this need

The steam is channelled through the stainless steel distributor into the air duct or air
handling unit. It can be easily assembled. It can be used by hanging on the switchboard
or the ground. It is sufficient to connect the water inlet connection, the water drainage
line connection, the steam and distribution connection, the electrical wiring and the
humidity sensor connection and to put the steam humidification unit into operation.
Auto humidification is accomplished thanks to the smart humidity and power control
system. Humidification systems from the TSH series can be used on air handling units
that don't have humidity control. The humidity sensor signal required for humidity
control is provided by the air handling unit manufacturer's control panel.

With the help of the oscillator used by the Technowell
ultrasonic humidifier introduces water particles smaller
than 10 m (3-5 m on average) into the air to increase
ambient humidity by creating a more balanced
moisture environment.

When low humidity levels are needed, our devices save energy in humidity control
by using a desiccant wheel style heat exchanger. With its silica gel wheel and
channels on the drum, it achieves precise humidity control by highly efficient
adsorption. Even after 8 years of use, the silica gel wheel still retains 90% of its
dehumidification capability.

With its long wheel life, durable layout, low energy consumption, and high drying
capacity, Desiccant Wheel Type Dehumidifiers are strong dehumidifiers suitable for
all environments.

It comes with a built-in temperature sensor, humidity sensor and a touch control
panel for real-time monitoring.

Advanced technology has been used to develop a heating system with controlled
regenerative heat that can save up to 30% on electricity consumption. To enable air
duct connection easier, the dehumidifier's air inlets and outlets comply with the
ISO7807 duct connection standard.

The adiabatic or the other name evaporative
humidification is performed by the high-pressure
humidification unit, which is one of the product
types used to satisfy the humidification need in
the air handling unit. The aim is to raise the relative
and absolute humidity of the environment fed by
the air handling unit. There are solutions such as
steam, honeycomb and high pressure
humidification to meet this need