BWT Perla - developed for those who make absolutely no compromises. Two columns with exchange material ensure silky-soft BWT pearl water around the clock and the highest possible peak water flow.
If the exchange material of one ion column is exhausted, the second one automatically goes into action. This means that silky-soft BWT pearl water is available to you without interruption 24 hours a day, 7 days a week. Thanks to adaptive parallel operation, the BWT Perla also achieves the highest peak water flow of up to 53 litres per minute. This means that silky-smooth pearl water can always flow when tapping simultaneously at several water taps or using modern comfort showers.
Safety systemsThe BWT safety systems of your BWT Perla One also comprehensively protect your home from water damage:

• AQA Guard floor sensor(s): Up to 10 sensors monitor the floor moisture (immediate protection e.g. against burst washing machine hoses).
• AQA Stop: The leakage protection that is indispensable in an emergency is on board free of charge. If the AQA Guard sensor detects moisture, the AQA Stop shuts off the water supply in the house.
• AQA Watch: Alarm function when permanently low flow rates are exceeded.

There are many filters on the market - all variants are state of the art to keep particles such as rust particles and sand grains away from the domestic installation. The installation of a filter in every domestic installation is even mandatory according to the relevant standards. But installation alone is only half the battle, because all filters unfortunately have one thing in common: the filter elements are not regularly backwashed or changed because it is often too complicated. And that is a big problem for the hygiene of drinking water pipes.
BWT has developed an ingenious solution for this: The BWT E1 single-lever filter - a protective filter with innovative comfort and hygiene benefits. Replacing the hygiene vault (this is the filter cup with the filter element) is so easy that the consumer can do it himself in just a few seconds.

• Unlock the safety catch and thus simultaneously shut off the water
• Pull up the lever and thus automatically eject the hygiene safe
• Insert the new hygiene safe. Close the lever. Lock. Done!

And all this in less than 30 seconds.
In this way, BWT has defused the hygiene risks of conventional filters, water-affected parts are no longer touched! In addition, the E1 also avoids splashing water when replacing the hygiene safe and the water pipe does not run empty. The BWT E1 filter is available as E1 HWS(domestic water station) incl. Pressure reducer or as E1 EHF (single lever filter) for applications without pressure reducer.

Mit der AQA therm HWG können Sie jederzeit bequem Ihre Heizungsanlage mit normgerecht aufbereitetem Wasser nachfüllen. Abhängig vom Heizungsvolumen und der Wasserzusammensetzung dient sie optional auch zur Befüllung.

• zum Befüllen und Nachfüllen von Anlagen
• Systemtrenner nach EN 1717: Schützt das Trinkwasser vor Rückfluss und Beeinträchtigung durch den Heizungskreislauf
• elektronisches Display für einfache Einstellungen
• Kapazität ca. 240 Liter je SRC-L Kartusche bei 20 °dH

Die AQA therm HWG besteht aus den Komponenten AQA therm HFB (Heizungsfüllblock), AQA therm HES (Heizungsstation) und der Einwegkartusche AQA therm SRC (Salze-​Reduzierende-Cartridge).

An die AQA therm HES kann auch eine AQA therm HRC (Härte-​Reduzierende-Cartridge) angeschraubt werden (Enthärtung).

BWT Perla - developed for those who make absolutely no compromises. Two columns with exchange material ensure silky-soft BWT pearl water around the clock and the highest possible peak water flow.
If the exchange material of one ion column is exhausted, the second one automatically goes into action. This means that silky-soft BWT pearl water is available to you without interruption 24 hours a day, 7 days a week. Thanks to adaptive parallel operation, the BWT Perla also achieves the highest peak water flow of up to 53 litres per minute. This means that silky-smooth pearl water can always flow when tapping simultaneously at several water taps or using modern comfort showers.
Safety systemsThe BWT safety systems of your BWT Perla One also comprehensively protect your home from water damage:

• AQA Guard floor sensor(s): Up to 10 sensors monitor the floor moisture (immediate protection e.g. against burst washing machine hoses).
• AQA Stop: The leakage protection that is indispensable in an emergency is on board free of charge. If the AQA Guard sensor detects moisture, the AQA Stop shuts off the water supply in the house.
• AQA Watch: Alarm function when permanently low flow rates are exceeded.

There are many filters on the market - all variants are state of the art to keep particles such as rust particles and sand grains away from the domestic installation. The installation of a filter in every domestic installation is even mandatory according to the relevant standards. But installation alone is only half the battle, because all filters unfortunately have one thing in common: the filter elements are not regularly backwashed or changed because it is often too complicated. And that is a big problem for the hygiene of drinking water pipes.
BWT has developed an ingenious solution for this: The BWT E1 single-lever filter - a protective filter with innovative comfort and hygiene benefits. Replacing the hygiene vault (this is the filter cup with the filter element) is so easy that the consumer can do it himself in just a few seconds.

• Unlock the safety catch and thus simultaneously shut off the water
• Pull up the lever and thus automatically eject the hygiene safe
• Insert the new hygiene safe. Close the lever. Lock. Done!

And all this in less than 30 seconds.
In this way, BWT has defused the hygiene risks of conventional filters, water-affected parts are no longer touched! In addition, the E1 also avoids splashing water when replacing the hygiene safe and the water pipe does not run empty. The BWT E1 filter is available as E1 HWS(domestic water station) incl. Pressure reducer or as E1 EHF (single lever filter) for applications without pressure reducer.

Mit der AQA therm HWG können Sie jederzeit bequem Ihre Heizungsanlage mit normgerecht aufbereitetem Wasser nachfüllen. Abhängig vom Heizungsvolumen und der Wasserzusammensetzung dient sie optional auch zur Befüllung.

• zum Befüllen und Nachfüllen von Anlagen
• Systemtrenner nach EN 1717: Schützt das Trinkwasser vor Rückfluss und Beeinträchtigung durch den Heizungskreislauf
• elektronisches Display für einfache Einstellungen
• Kapazität ca. 240 Liter je SRC-L Kartusche bei 20 °dH

Die AQA therm HWG besteht aus den Komponenten AQA therm HFB (Heizungsfüllblock), AQA therm HES (Heizungsstation) und der Einwegkartusche AQA therm SRC (Salze-​Reduzierende-Cartridge).

An die AQA therm HES kann auch eine AQA therm HRC (Härte-​Reduzierende-Cartridge) angeschraubt werden (Enthärtung).