ESBE Linear units is a range of fast controll valves with an integrated actuator.

Valves Series SLB130 represents a 3-way high speed Diverting and Mixing valve.

The ESBE Series SLB130 is a high speed compact 3-way diverting and mixing valve made out of brass. Thanks to the new motor drive system a high speed change-over time of 2 seconds, and a high precision control over the flow characteristics is possible.

Valve series SLB120

The ESBE Series SLB120 is a high speed compact 2-way control valve made out of brass. Thanks to the new motor drive system a high speed change-over time of 2 seconds, and a high precision control over the flow characteristics is possible.

Valve series SLD130

The ESBE Series SLD130 is a high-speed compact 3-way mixing valve made from brass approved for use in potable water. Thanks to the motor drive system a change-over time of 1 seconds can be achieved. The SLD can function both as a mixing valve and a change over valve in i.e., HIUs, underfloor heating or hot water circulation applications.

More info at: https://esbe.eu/group/products/linear-units

ESBE actuators are reliable swedish ones for energy-efficient regulation in heating and cooling systems. Series ARA600 are available in 3-point, 2-point and proportional signal. The compact actuator is designed for operating rotary valves DN 15-50 and has an operating range of 90°. The series can easily be manually operated by the pull-and-turn knob on the front of the cover. Auxiliary switch, available as premounted or optional kit, can be set in any position and is easily set by a unique solution.

• Superb regulation with reliable and quiet operation.
• Perfect match between the actuator and ESBE valve.
• Auxiliary switch available.

More info at: https://esbe.eu/group/products/rotary-actuators

ESBE offers a range of circulation units developed specifically for the market where few units serves a wide range of demands. All due to the built in 100 years of experience by ESBE in controlling and regulation of heating- cooling- and potable water systems.

Circulation Units are Plug&Play devices for quick and easy system setup. The products are used for the heat distribution and temperature control. Direct supply, constant temperature control with thermostatic mixing valve, or mixing function with motorized mixing valve and even equipped with controllers, the wide range of products allows to choose preferred solution.

• Mixing group – equipped with ESBE rotary mixing valve, with progressive characteristic andactuator or controller. For heating and cooling circuits where regulation of the flow temperature is required.
• Mixing group – equipped with ESBE thermostatic mixing valve. For heating circuits where regulation of the flow temperature is required.
• Direct unit – direct distribution of the heat to the system

ESBE DN20 Units are alternative solutions to existing product group – Circulation Units

A compact product with high performance for all customers who appreciate TOP technical solutions.

The ESBE Manifold Box GMB is an extremely simple and flexible solution, to enable management of zone heating.

• Pre-prepared input and output holes makes the installation quick and neatly
• Can be mounted on, or discreetly recessed into the wall
• High aesthetics with white epoxy metal casing

More info at: https://esbe.eu/group/products/circulation-units

ESBE CRx controller contributes to a smart, safe and energy saving home.

ESBE controllers CRx200 secures heating, provides easy handling, and uses smart software for a multitude of different heating systems.

At ESBE we set high focus on smart solutions and easiness of product use. The controller should just work, and the customers should have the privilege to choose what they need based on daily observations of system behavior. This has been accomplished with implementing ESBE Smart Software & Self-Adaptive System.

• ESBE Smart Software & Self-Adaptive System
• Accurat and precise control
• Upgrade possibility at any time

https://esbe.eu/group/products/controllers/crd200

ESBE Linear units is a range of fast controll valves with an integrated actuator.

Valves Series SLB130 represents a 3-way high speed Diverting and Mixing valve.

The ESBE Series SLB130 is a high speed compact 3-way diverting and mixing valve made out of brass. Thanks to the new motor drive system a high speed change-over time of 2 seconds, and a high precision control over the flow characteristics is possible.

Valve series SLB120

The ESBE Series SLB120 is a high speed compact 2-way control valve made out of brass. Thanks to the new motor drive system a high speed change-over time of 2 seconds, and a high precision control over the flow characteristics is possible.

Valve series SLD130

The ESBE Series SLD130 is a high-speed compact 3-way mixing valve made from brass approved for use in potable water. Thanks to the motor drive system a change-over time of 1 seconds can be achieved. The SLD can function both as a mixing valve and a change over valve in i.e., HIUs, underfloor heating or hot water circulation applications.

More info at: https://esbe.eu/group/products/linear-units

ESBE actuators are reliable swedish ones for energy-efficient regulation in heating and cooling systems. Series ARA600 are available in 3-point, 2-point and proportional signal. The compact actuator is designed for operating rotary valves DN 15-50 and has an operating range of 90°. The series can easily be manually operated by the pull-and-turn knob on the front of the cover. Auxiliary switch, available as premounted or optional kit, can be set in any position and is easily set by a unique solution.

• Superb regulation with reliable and quiet operation.
• Perfect match between the actuator and ESBE valve.
• Auxiliary switch available.

More info at: https://esbe.eu/group/products/rotary-actuators

ESBE offers a range of circulation units developed specifically for the market where few units serves a wide range of demands. All due to the built in 100 years of experience by ESBE in controlling and regulation of heating- cooling- and potable water systems.

Circulation Units are Plug&Play devices for quick and easy system setup. The products are used for the heat distribution and temperature control. Direct supply, constant temperature control with thermostatic mixing valve, or mixing function with motorized mixing valve and even equipped with controllers, the wide range of products allows to choose preferred solution.

• Mixing group – equipped with ESBE rotary mixing valve, with progressive characteristic andactuator or controller. For heating and cooling circuits where regulation of the flow temperature is required.
• Mixing group – equipped with ESBE thermostatic mixing valve. For heating circuits where regulation of the flow temperature is required.
• Direct unit – direct distribution of the heat to the system

ESBE DN20 Units are alternative solutions to existing product group – Circulation Units

A compact product with high performance for all customers who appreciate TOP technical solutions.

The ESBE Manifold Box GMB is an extremely simple and flexible solution, to enable management of zone heating.

• Pre-prepared input and output holes makes the installation quick and neatly
• Can be mounted on, or discreetly recessed into the wall
• High aesthetics with white epoxy metal casing

More info at: https://esbe.eu/group/products/circulation-units