Buffer tanks are tanks used to store chilled water, allowing the operating cycle of the matched heat pump to be optimised and thereby increasing its efficiency. Fiorini buffer tanks stand out in terms of their longevity, the high-density insulation used and the finishing done in true “Made in Italy” style.

The range of Fiorini buffer tanks has been designed to improve the operation and the performance of the most advanced conditioning systems.

The broad range and the options for customisation enable optimum solutions to be built for any type of system. Fiorini buffer tanks increase the system’s water capacity and improve the longevity of machines, heat pumps, chillers and compressors.

They are used to store chilled water and are essential in every conditioning system that operates with a reduced amount of water. Installing a storage tank makes the heat pump more efficient and increases its longevity.

Thanks to the storage of chilled water, provided by Fiorini buffer tanks, continuous and rapid changes in the water temperature, due to intermittent regulation, are avoided. Installing a Fiorini buffer tank is also recommended because it reduces, as far as is possible, the compressor’s start-up and switch off cycles.

The storage tanks, depending on the aim, can be divided into balancing tanks and in-line storage tanks. The balancing tanks create 2 separate circuits which have anti-mix or internal baffles, diffusing pipes or conveyor pipes. The in-line storage tanks, on the other hand, do not divide the circuit and should be installed on the return side, preferably before the circulation pump.

Fiorini water heaters are tanks to produce and store domestic hot water. Domestic hot water is produced through a heat exchange done via coils positioned within the body of the water heater.

The Fiorini range of water heaters is made up of fixed exchanger water heaters and removable exchanger water heaters (tube heat exchanger or copper spiral). Moreover, since 2021, PLUGGY has been introduced: an electric storage water heater.

Fiorini offers water heaters in various sizes from 200 to 3000 litres, and equipped with different insulation based on the capacity selected, a magnesium anode to protect against galvanic currents and an inspection flange to ease access and maintenance.

Fiorini water heaters stand out for their durability and respect for the ERP Directive, since they undergo treatment for internal protection, either glass-lining or Bluetech enamelling, whilst the exterior comes with insulation having a high insulating ability.

Furia is a heat pump system that uses R290 gas for heating, cooling and the production of domestic hot water. The system consists of a packaged unit, installed externally, and an indoor unit dedicated to DHW production and air conditioning management.

Fiorini hydronic kits are pre-assembled hydraulic stations that perform the functions of storing and distributing water in cooling systems.

They are specifically designed to optimise the performance of conditioning and cooling systems and to reduce their installation times.

The range includes HPT, HP 2.0 and VKB 2.0 units that make up an integrated, plug & play system complete with all the components necessary for efficient operation of the hydraulic circuit and for the distribution of chilled water.

The Hydronic Kit Configurator is part of a suite of applications called FioriniLab, a web application tool that allows you to select and accessorize a standard Fiorini product belonging to the hydronic unit category, specifically HP, HPT and VKB.

Fiorini hydronic kits are hydraulic stations, with or without storage tank, that can be combined with any type of water cooler. The design and construction of these kits aim to optimise conditioning systems by managing, in the best way possible, hydronic distribution.

Fiorini hydronic kits handle the storage and/or distribution of water in cooling systems. They come as a pre-assembled, complete system to guarantee an efficient distribution of chilled water throughout the hydraulic circuit.

The units are designed and built to be installed outdoors and can be customised on the basis of the customer’s specific needs. Fiorini offers a wide choice of pump/storage tank combinations to meet all the needs of each individual system or establishment.

Buffer tanks are tanks used to store chilled water, allowing the operating cycle of the matched heat pump to be optimised and thereby increasing its efficiency. Fiorini buffer tanks stand out in terms of their longevity, the high-density insulation used and the finishing done in true “Made in Italy” style.

The range of Fiorini buffer tanks has been designed to improve the operation and the performance of the most advanced conditioning systems.

The broad range and the options for customisation enable optimum solutions to be built for any type of system. Fiorini buffer tanks increase the system’s water capacity and improve the longevity of machines, heat pumps, chillers and compressors.

They are used to store chilled water and are essential in every conditioning system that operates with a reduced amount of water. Installing a storage tank makes the heat pump more efficient and increases its longevity.

Thanks to the storage of chilled water, provided by Fiorini buffer tanks, continuous and rapid changes in the water temperature, due to intermittent regulation, are avoided. Installing a Fiorini buffer tank is also recommended because it reduces, as far as is possible, the compressor’s start-up and switch off cycles.

The storage tanks, depending on the aim, can be divided into balancing tanks and in-line storage tanks. The balancing tanks create 2 separate circuits which have anti-mix or internal baffles, diffusing pipes or conveyor pipes. The in-line storage tanks, on the other hand, do not divide the circuit and should be installed on the return side, preferably before the circulation pump.

Fiorini water heaters are tanks to produce and store domestic hot water. Domestic hot water is produced through a heat exchange done via coils positioned within the body of the water heater.

The Fiorini range of water heaters is made up of fixed exchanger water heaters and removable exchanger water heaters (tube heat exchanger or copper spiral). Moreover, since 2021, PLUGGY has been introduced: an electric storage water heater.

Fiorini offers water heaters in various sizes from 200 to 3000 litres, and equipped with different insulation based on the capacity selected, a magnesium anode to protect against galvanic currents and an inspection flange to ease access and maintenance.

Fiorini water heaters stand out for their durability and respect for the ERP Directive, since they undergo treatment for internal protection, either glass-lining or Bluetech enamelling, whilst the exterior comes with insulation having a high insulating ability.

Furia is a heat pump system that uses R290 gas for heating, cooling and the production of domestic hot water. The system consists of a packaged unit, installed externally, and an indoor unit dedicated to DHW production and air conditioning management.