• Comfort and safety in one
• Integrated anti-scald function
• Requires no maintenance

LK 551 HydroMix is a mixing valve for water heating and heating systems. The mixing valve has a thermostatic element that regulates the supply of cold as well as hot water in order to achieve the desired ­temperature. The valve has an anti-scald function that shuts off the ­incoming hot water flow in case of failure of cold-water supply.
Arrows on the valve body indicate the direction of the flow.
C = incoming cold water
H = incoming hot water
M = outgoing mixed water
When fitted on top of boiler/storage tanks with built-in water heaters the valve should be installed with some space between boiler/storage tank and valve so as not to let the function of the valve be affected by heat radiation.
The valve knob is used to set the desired warm water temperature within the specified range. The ­protective cap prevents unintentional changes of the ­temperature setting.

• Low internal leakage
• The slide is designed to provide accurate regulation at low flows
• Click system for actuator

LK 525 MultiZone 3R is a 3-way valve that can be used as a mixing valve or as a diverting valve in heating systems.

The valve is constructed so that the leakage is less than 0.1% of Kvs at 100 kPa. It also has a split linear characteristic which means that the regulation is good even at low flows and capacities.

The valve must not be installed with the motor underneath the valve unit. Please note that the motor can be installed in only one position.

The motor operates anti clockwise when the black conductor is powered and clockwise when the brown conductor is powered.

The valve requires no maintenance but the installation should be checked regularly.

• Portable
• Water level detection
• Possible to lock after commissioning

The LK 450 EasyHeat P 9kW is a complete portable electrically heated boiler. It is primarily meant to be used as a temporary heater, e.g. for drying concrete slabs installed with under floor heating or for heating buildings under construction.

LK 450 EasyHeat P (programmable) 9kW has possibility to make individual programs of a drying period. 60 individual heating steps enables full control of the drying process and possibility to receiving a protocol afterwards from a micro SD-card.

In case of use as a temporary boiler constant temperature can be set.

EasyHeat comes in a blue aluminum cabinet with inspection window, so you can monitor the unit during operation. Cabinet is lockable by using a padlock.

The transport trolley is not included but can be bought as an accessorie.

• All in one
• Easy to install
• Easy to combine with electronic regulation

LK HydronicGroup is a complete pump group that is suitable for heating where direct supply or mixed supply is desirable. Consists of a highly efficient circulation pump, insulation, wall mounting bracket and two ball valves with thermometer, on the return side there is an integrated check valve.

• Compact design
• Accompanying insulation protects against condensation and icing (DN25 & 32)
• Minimal pressure drop due to the placement of the filter in the ball

LK 521 MultiFill® is a combination valve for easy ­filling of refrigerant fluid into ground source heat systems. The valve has a filter to protect the evaporator against ­possible grit. Its compact construction allows it to be installed in tight spaces. The valve comes with an insulation to ­protect against condensation and possible icing. LK 521 MultiFill® can also be used in other applications where filling and filtration are required.
Arrows on the valve body indicate the direction of the flow. The enclosed insulation should be used.
Apart from cleaning the filter no maintenance is required. The filter should be cleaned immediately after installation, a month later and then every other year or when refilling fluid to the system. Check the installation regularly.

• Comfort and safety in one
• Integrated anti-scald function
• Requires no maintenance

LK 551 HydroMix is a mixing valve for water heating and heating systems. The mixing valve has a thermostatic element that regulates the supply of cold as well as hot water in order to achieve the desired ­temperature. The valve has an anti-scald function that shuts off the ­incoming hot water flow in case of failure of cold-water supply.
Arrows on the valve body indicate the direction of the flow.
C = incoming cold water
H = incoming hot water
M = outgoing mixed water
When fitted on top of boiler/storage tanks with built-in water heaters the valve should be installed with some space between boiler/storage tank and valve so as not to let the function of the valve be affected by heat radiation.
The valve knob is used to set the desired warm water temperature within the specified range. The ­protective cap prevents unintentional changes of the ­temperature setting.

• Low internal leakage
• The slide is designed to provide accurate regulation at low flows
• Click system for actuator

LK 525 MultiZone 3R is a 3-way valve that can be used as a mixing valve or as a diverting valve in heating systems.

The valve is constructed so that the leakage is less than 0.1% of Kvs at 100 kPa. It also has a split linear characteristic which means that the regulation is good even at low flows and capacities.

The valve must not be installed with the motor underneath the valve unit. Please note that the motor can be installed in only one position.

The motor operates anti clockwise when the black conductor is powered and clockwise when the brown conductor is powered.

The valve requires no maintenance but the installation should be checked regularly.

• Portable
• Water level detection
• Possible to lock after commissioning

The LK 450 EasyHeat P 9kW is a complete portable electrically heated boiler. It is primarily meant to be used as a temporary heater, e.g. for drying concrete slabs installed with under floor heating or for heating buildings under construction.

LK 450 EasyHeat P (programmable) 9kW has possibility to make individual programs of a drying period. 60 individual heating steps enables full control of the drying process and possibility to receiving a protocol afterwards from a micro SD-card.

In case of use as a temporary boiler constant temperature can be set.

EasyHeat comes in a blue aluminum cabinet with inspection window, so you can monitor the unit during operation. Cabinet is lockable by using a padlock.

The transport trolley is not included but can be bought as an accessorie.