Press fittings for multilayer pipe of line SAFE_PRESS are equipped with LEAK BEFORE PRESS (LBP) system to detect water leak when the fitting is not pressed. This allows the plumber to easily detect the improper installation and eventually react promptly. The “leak before press” function guarantees greater safety and time savings during installation.
Fittings have been designed and tested to be used with 3 different crimper profiIes: TH, H, U.
Fittings are suitable for cold or hot water supply for sanitary or heating systems, and for any kind of sanitary installation such as domestic, commercial, industry and farming and with non-aggressive fluids.
The geometry of the fitting allows an excellent coupling between pipe and fitting after pressing and the plastic insulation ring windows allow to check the correct insertion of the pipe. Two O-rings guarantee the seal and reliability over time.
Fitting body is made of brass, while the sleeve is made of AISI 304 stainless steel.
Since the connecting type is irreversible (it is not possible to disassemble), it is possible to place the fittings chased in, taking care of protecting it from non-suitable materials.

ADVANTAGES

• Leak Before Press” function for extra safety
• Multitool TH, H, U
• Plastic insulation ring to prevent electrolytic corrosion, and with windows to check the correct insertion of pipe
• Double O-Ring
• DVGW certified
• Raw materials complying with UBA LIST
• ISO 7/1 threads
• Efficient installation: double wallplate elbow allows to make installations in series or rings for a better distribution and change of water
• Product traceability guaranteed by the date stamped on the body of the fitting
• Wide range

The 6M00 SERIES manifolds called Loki with ¾” Eurocone outlets are the ideal solution for the distribution of water in radiant heating and cooling systems. The extreme flexibility offered by the ability to assemble them at will offers multiple combinations and helps reduce warehouse stock.
The self-seal thread and O-Ring seal allow quick assembly and alignment of the connectors without the aid of any equipment and a guaranteed seal without the use of plumber's hemp or Teflon.
A wide range of accessories makes it possible to assemble the manifold with all the necessary components for the proper functioning of the system: brackets, shut-off ball valves, venting valves and input-output taps.

ADVANTAGES:

• Stock reduction
• Maximum flexibility and easy configuration. Self aligning granting the correct and quick aligning of the coupled manifolds
• No unnecessary waste
• Suitable both for high and low temperature installations
• CONSTANT CENTER DISTANCE 50mm
• PERFECTLY TIGHT: thanks to the O-Ring the coupling is tight without using any additional means, such as Teflon tape or hemp, for a faster installation
• High-quality raw materials (UBA LIST)
• Suitable for plastic, metal and metal-plastic pipes
• Product traceability guaranteed by the date stamped on the body of the manifold
• Balancing of each loop

FLEXUS 90° manifolds are suitable for heating and sanitary water distribution. Self aligning grants the aligning of the coupled manifolds without using any additional means, such as teflon tape or hemp.
Their configuration allows the realization of hot and/or cold circuits in parallel.

ADVANTAGES

• SELF ALIGNING granting the correct and quick aligning of the coupled manifolds
• CONSTANT CENTER DISTANCE
• PERFECTLY TIGHT: thanks to the O-Ring the coupling is tight without using any additional means, such as Teflon tape or hemp, for a faster installation
• ENCUMBRANCES REDUCTION as there is no need to use hemp or other sealants
• Suitable for drinking water
• "Gravity casting" body: lower pressure drop and more compact installation
• Available with valves (with destination labels), with 3/4" or 1" inlet and 1/2", 3/4"EK, 24x19 outlets
• Raw materials complying with UBA LIST
• Suitable for plastic, metal and metal-plastic pipes

Pre-assembled manifold in stainless steel for floor (or ceiling) heating and cooling systems and radiators.

Press fittings for multilayer pipe of line SAFE_PRESS are equipped with LEAK BEFORE PRESS (LBP) system to detect water leak when the fitting is not pressed. This allows the plumber to easily detect the improper installation and eventually react promptly. The “leak before press” function guarantees greater safety and time savings during installation.
Fittings have been designed and tested to be used with 3 different crimper profiIes: TH, H, U.
Fittings are suitable for cold or hot water supply for sanitary or heating systems, and for any kind of sanitary installation such as domestic, commercial, industry and farming and with non-aggressive fluids.
The geometry of the fitting allows an excellent coupling between pipe and fitting after pressing and the plastic insulation ring windows allow to check the correct insertion of the pipe. Two O-rings guarantee the seal and reliability over time.
Fitting body is made of brass, while the sleeve is made of AISI 304 stainless steel.
Since the connecting type is irreversible (it is not possible to disassemble), it is possible to place the fittings chased in, taking care of protecting it from non-suitable materials.

ADVANTAGES

• Leak Before Press” function for extra safety
• Multitool TH, H, U
• Plastic insulation ring to prevent electrolytic corrosion, and with windows to check the correct insertion of pipe
• Double O-Ring
• DVGW certified
• Raw materials complying with UBA LIST
• ISO 7/1 threads
• Efficient installation: double wallplate elbow allows to make installations in series or rings for a better distribution and change of water
• Product traceability guaranteed by the date stamped on the body of the fitting
• Wide range

The 6M00 SERIES manifolds called Loki with ¾” Eurocone outlets are the ideal solution for the distribution of water in radiant heating and cooling systems. The extreme flexibility offered by the ability to assemble them at will offers multiple combinations and helps reduce warehouse stock.
The self-seal thread and O-Ring seal allow quick assembly and alignment of the connectors without the aid of any equipment and a guaranteed seal without the use of plumber's hemp or Teflon.
A wide range of accessories makes it possible to assemble the manifold with all the necessary components for the proper functioning of the system: brackets, shut-off ball valves, venting valves and input-output taps.

ADVANTAGES:

• Stock reduction
• Maximum flexibility and easy configuration. Self aligning granting the correct and quick aligning of the coupled manifolds
• No unnecessary waste
• Suitable both for high and low temperature installations
• CONSTANT CENTER DISTANCE 50mm
• PERFECTLY TIGHT: thanks to the O-Ring the coupling is tight without using any additional means, such as Teflon tape or hemp, for a faster installation
• High-quality raw materials (UBA LIST)
• Suitable for plastic, metal and metal-plastic pipes
• Product traceability guaranteed by the date stamped on the body of the manifold
• Balancing of each loop

FLEXUS 90° manifolds are suitable for heating and sanitary water distribution. Self aligning grants the aligning of the coupled manifolds without using any additional means, such as teflon tape or hemp.
Their configuration allows the realization of hot and/or cold circuits in parallel.

ADVANTAGES

• SELF ALIGNING granting the correct and quick aligning of the coupled manifolds
• CONSTANT CENTER DISTANCE
• PERFECTLY TIGHT: thanks to the O-Ring the coupling is tight without using any additional means, such as Teflon tape or hemp, for a faster installation
• ENCUMBRANCES REDUCTION as there is no need to use hemp or other sealants
• Suitable for drinking water
• "Gravity casting" body: lower pressure drop and more compact installation
• Available with valves (with destination labels), with 3/4" or 1" inlet and 1/2", 3/4"EK, 24x19 outlets
• Raw materials complying with UBA LIST
• Suitable for plastic, metal and metal-plastic pipes