AQUA-PLUS SDR 9 made of PP-RCT

Interplast, with its constant innovation, strategically produces and promotes
the latest generation of PP-RCT polypropylene pipes, which can be described as
"The future of plastic piping systems".
PP-RCT is a polypropylene with a random polymerization structure with a modified dual-core crystallinity.

ADVANTAGES

—Higher durability than the classic PP-R, as specified in EN 15874 and DIN 8077 (especially at high temperatures). —PP-RCT, according to European standards, does not show any transitions and change of inclination in the logarithmic diagrams of hydraulic resistance, due to its excellent aging behavior.

—Excellent behavior in chlorine.
—Smaller wall thickness with greater durability.
—More amount of transported water and optimized pressure drops compared to SDR 6 & 7,4.
—Higher hydraulic efficiency of networks.
—Can be used in demanding district heating installations, even when the supply temperature is 100°C.
—Metal deactivators
—UV stabilizers

AQUA-PLUS SDR 7,4 made of PP-R 125

Interplast, with its constant passion for upgrading its products, presents the newest generation of PP-R 125 polypropylene pipes. The new type of pipe upgrades the highly successful pipe series made of PP-R 112 of the last decade.

The resistance of the new pipes made of MRS 12,5 to temperatures, pressures and technical characteristics is much higher than the ordinary pipes made of MRS 8,0 (PP-R 80) that are available on the market.

The new Aqua-Plus 125 pipes are designed, produced and tested for their quality according to the EN15874 and DIN 8077/78 standards.

ADVANTAGES

—Increased mechanical strength
—Increased chemical resistance of the pipe against corrosion
—Larger amount of transported water
—Fewer pressure drops
—Lighter pipe
—Larger lifespan
—Metal deactivators
—UV stabilizers

AQUA-PLUS SDR 6

AQUA-PLUS SDR 7,4 with UV protection

AQUA-PLUS Clima SDR 11 made of PP-R 125

AQUA-PLUS SDR 7,4 / 11 made of PP-R 125 with 5-layer GLASS FIBERS with Oxygen Barrier (ΟΤ)

AQUA-PLUS PIPES with GLASS FIBER (GF) MADE OF PP-R 125

AQUA-PLUS with aluminum made of PP-R 125

The fittings are manufactured in accordance with DIN 16962 from Polypropylene Random (Type 3) and available in dimensions from 20 mm to 450 mm. For their production the company uses raw material with a low melt flow index, identical to that of its pipes so that the mechanical strength of the pipe does not differ from that of the fittings. They are produced with a wall thickness equivalent to 30 bar. The PP-R overlaps the male brass inserts on the inside.The brass parts are reinforced, heavy-duty and low hardness (105 Brinell) thus eliminating the possibility of cracking, which is particularly common in fittings with female threading.