The ZENiX Cabinet is a range of modular control panels that offer a wide range of options to meet the requirements of your project. The panels are equipped with DIN rails on which various components and devices can be mounted. Each ZENiX Cabinet comes with a built-in power supply with switch, an additional socket and an Ethernet switch. All components are pre-wired and connected to terminal blocks at the bottom of the cabinet.

The fire dampers from Rf-Technologies are all CE marked. They can be equipped with various types of mechanisms depending on the specific needs linked to the project or to the local regulations.

• circular from 100 to 630 mm;
• rectangular from 200 x 100 mm till 3050 x 1650 mm;
• easy to install and seal using standard materials;
• superior air flow characteristics;
• can be installed at a minimal distance from another fire damper or from an adjacent supporting construction

Smoke control shutters and dampers are suitable for use in ventilating protected lobbies, venting to shafts either naturally or mechanically. They open to evacuate smoke in emergency situations whilst maintaining fire resistant integrity in standby position.

• smoke control shutters and dampers;
• aesthetic model to fit in any interior;
• motorised models for an easy resetting to the closed position after carrying out a function test

The circular fire damper cartridge is a compact fire resistant product for ducts with a small diameter. It is inserted inside ventilation ducts that cross walls in order to stop the propagation of fire. It is characterised by its easy installation. Two versions are available: the standard fire damper cartridge (technical datasheet S2/S3) and the cartridge equipped with a finishing ventilation valve 'V' (technical datasheet S4/S5) for installation at duct ends.

The ZENiX Cabinet is a range of modular control panels that offer a wide range of options to meet the requirements of your project. The panels are equipped with DIN rails on which various components and devices can be mounted. Each ZENiX Cabinet comes with a built-in power supply with switch, an additional socket and an Ethernet switch. All components are pre-wired and connected to terminal blocks at the bottom of the cabinet.

The fire dampers from Rf-Technologies are all CE marked. They can be equipped with various types of mechanisms depending on the specific needs linked to the project or to the local regulations.

• circular from 100 to 630 mm;
• rectangular from 200 x 100 mm till 3050 x 1650 mm;
• easy to install and seal using standard materials;
• superior air flow characteristics;
• can be installed at a minimal distance from another fire damper or from an adjacent supporting construction

Smoke control shutters and dampers are suitable for use in ventilating protected lobbies, venting to shafts either naturally or mechanically. They open to evacuate smoke in emergency situations whilst maintaining fire resistant integrity in standby position.

• smoke control shutters and dampers;
• aesthetic model to fit in any interior;
• motorised models for an easy resetting to the closed position after carrying out a function test