Regina Heat pumps are ideal for a more compact installation of hot water production systems.  

The Reginas heat pumps are available in two different ranges: Regina Max and Regina Smart.  

The Regina Max range is made of 444 stainless steel. They are available in the capacities of 150L, 200L and 300L. 

The Regina Smart range is made of duplex 2205 stainless steel which is more resistant to corrosion. This range of heat pumps is recommended to be used in geographical areas where water is more corrosive due to its chemical composition. They are available in the capacities of 100L, 200L, 300L and 500L. With WI-FI integrated, you can control your heat pump through your phone by using an app. 

Both models are available with or without heat exchangers. 

Technical specifications: 

• COP (Room temperature: 20°C): from 4,02 to 4,32 (EN16147) 

• Energetic efficiency: A / A+ 

• DHW temperature: 60°C 

• Gas type: refrigerant R134a / R290 

The Slim-C Touch range are fan coils based on the technology of heat transfer by forced convection. This mechanism allows a great heat efficiency when comparing to traditional radiators. Its thickness of 13cm gives it a compact, simple, and attractive design, which fits in multiple architectures. Available in the white color (RAL9003).

Equipped with a digital touch controller, thermostat, infrared remote control, 3-way valve and with thermally insulated condensate tray.

Technical specifications:

• DC motor
• Air flow (Minimum and Maximum): 300 – 358 (m3/h) for Slim 60-C model.
• Hydraulic connections on the left
• Low noise level

The Vancouver heat pump range is the ideal solution for heating and cooling generation, and also for hot water production, all in one machine. Equipped with DC inverter technology and with and hydraulic module, available in capacities from 6 to 24kW. This range has been designed for domestic use and for little commercial spaces. 

These heat pumps can be associated to fan coils, radiant heating floor or solar energy systems. 

This range of heat pumps is also available in High Temperature version. This version allows you to reach higher temperatures. They are available from 6 to 16kW. 

Technical specifications: 

• High Energetic Efficiency (A+++) 

• R290 cooling gas, eco-friendly 

• Outlet water temperature up to 60ºC and up to 75ºC for the high temperature version 

• Room temperature: - 15 – 45ºC 

The wood insert Atlantis Neo is designed for central heating generation applications. The door is made of screen-printed glass and the body of the insert by steel plates.  

Technical specifications: 

• Eco-design 2022 

• Energetic efficiency: A+ 

• Yield: 80% 

• Energy Efficiency Index (EEI): 107  

• Wood consumption: from 4,8 to 9,0 Kg/h 

• Nominal power: 20,8 kW 

Our new polyfuel boiler York Neo has been conceived for time-programmed use. Its automatic ignition allows a more profitable fuel consumption. Made of steel plates, this boiler has a nominal power of 35kW. As it is a polyfuel boiler, it allows you to burn pellets, wood, or both at the same time. 

There are tools for cleaning included and is very resistant to condensation. 

Technical specifications: 

• Energetic efficiency: A+  

• Eco-design 2022 

• Time schedule (weekly or daily) 

• Large capacity silo of 85kg of pellet 

• Nominal power: 35kW 

• Maximum wood length: 420mm