1/4 " To 4 " Female X Female 25 Bar Brass Ball Valve With Flat Lever Handle

Description

Working Pressure ：25bar (362.5 psi)

Working Temperature ：from -10 ℃ to +120 ℃ (from 14℉ to 248℉)

Thread ISO228 (equivalent to DIN 259 and BS2779)

Opening/closing Test 10,000 times

Details

Brass Valve Body: High-density forging, no blister, no air holes, no leakages. Made by special high precision CNC machines.

Brass Bonnet: High-density forging, no blister, no air holes, no leakages. Made by special high precision CNC machines.

Valve Ball: Smooth and wear resisting, with good sealing performance.

Brass Valve Stem: Made of hot rolled brass, high tensile strength, good toughness, long-term use without deformation, fracture.

Ball Seat: Made by pure PTFE(polytetrafluoroethylene), with high elasticity and wear resistance, is not easy aging.

Handle: Plated with dacromet, the surface is coated against corrosion, the coating is thickened, the thickness is up to 1.3mm, comfortable using.

O-ring: NBR & FKM, made of imported raw material, small friction coefficient, long service life and not easy to leak.

Stainless Steel Locknut: Internal design of anti-loose, can be used for long time.

Description

Working Pressure 5bar (72.5 psi)

Working Temperature from -10 ℃ to +80 ℃ (from 14℉ to 176℉)

Thread ISO228(equivalent to DIN259 and BS2779)

Opening/closing Test 10,000 times

Details

Brass Valve Body: High-density forging, no blister, no air holes, no leakages. Made by special high precision CNC machines.

Brass Bonnet: High-density forging, no blister, no air holes, no leakages. Made by special high precision CNC machines.

Valve Ball: Smooth and wear resisting, with good sealing performance.

Brass Valve Stem: Made of hot rolled brass, high tensile strength, good toughness, long-term use without deformation, fracture.

Ball Seat: Made by pure PTFE(polytetrafluoroethylene), with high elasticity and wear resistance, is not easy aging.

Handle: Plated with dacromet, the surface is coated against corrosion, the coating is thickened, the thickness is up to 1.3mm, comfortable using.

O-ring: made of imported raw material,special for gas, small friction coefficient, long service life and not easy to leak.

Stainless Steel Locknut: Internal design of anti-loose, can be used for long time.

10Bar Brass Angle Valve Polished Chromed-Plated With Zinc Alloy Handle / Single Way Brass Angle Valve

Description

Working Pressure:10bar (145 psi)

Working Temperature from 0 ℃ to +80 ℃ (from 32℉ to 176℉)

Thread ISO228 (equivalent to DIN 259 and BS2779)

Details

Brass Valve Body: High-density forging, no blister, no air holes, no leakages. Made by special high precision CNC machines.

Brass Bonnet: High-density forging, no blister, no air holes, no leakages. Made by special high precision CNC machines.

Surface: Professionally polished and chrome plated, with nine-level electroplating standards. The surface is as smooth as a mirror, and can be used for long time.

Brass Valve Stem: Made of hot rolled brass, high tensile strength, good toughness, long-term use without deformation, fracture.

Internal: High-precision machining, smooth and non-scalling, is not easy to block, and make the service life longer.

Handle: Made by zinc alloy is exquisite in appearance and unique in structure, which conforms to the human body ergonomics and is long time to use.

Water Inlet: High-precision thread processing, perfect docking with water inlet pipe, silky smooth. Cover: Made of stainless steel, anti-rust, long-term use of the surface is still as new.

1/2 " To 4 " 16 Bar Brass Y Strainer

Description

Working Pressure 16bar (232 psi)

Working Temperature from -10 ℃ to +120 ℃ (from 14℉ to 248℉)

Thread ISO228 (equivalent to DIN 259 and BS2779)

Details

Brass Valve Body: High-density forging, no blister, no air holes, no leakage. Made by special high precision CNC machines.

Brass Cap: Hexagonal structure, by high-density forging, is easy to revolve to take out the filter.

Filter: Made of stainless steel 304, and can be taken out for cleaning after long-term use.

Seat: Made by pure PTFE, with high elasticity and wear resistance and is not easy aging.

1/4 " To 4 " Female X Female 25 Bar Brass Ball Valve With Flat Lever Handle

Description

Working Pressure ：25bar (362.5 psi)

Working Temperature ：from -10 ℃ to +120 ℃ (from 14℉ to 248℉)

Thread ISO228 (equivalent to DIN 259 and BS2779)

Opening/closing Test 10,000 times

Details

Brass Valve Body: High-density forging, no blister, no air holes, no leakages. Made by special high precision CNC machines.

Brass Bonnet: High-density forging, no blister, no air holes, no leakages. Made by special high precision CNC machines.

Valve Ball: Smooth and wear resisting, with good sealing performance.

Brass Valve Stem: Made of hot rolled brass, high tensile strength, good toughness, long-term use without deformation, fracture.

Ball Seat: Made by pure PTFE(polytetrafluoroethylene), with high elasticity and wear resistance, is not easy aging.

Handle: Plated with dacromet, the surface is coated against corrosion, the coating is thickened, the thickness is up to 1.3mm, comfortable using.

O-ring: NBR & FKM, made of imported raw material, small friction coefficient, long service life and not easy to leak.

Stainless Steel Locknut: Internal design of anti-loose, can be used for long time.

Description

Working Pressure 5bar (72.5 psi)

Working Temperature from -10 ℃ to +80 ℃ (from 14℉ to 176℉)

Thread ISO228(equivalent to DIN259 and BS2779)

Opening/closing Test 10,000 times

Details

Brass Valve Body: High-density forging, no blister, no air holes, no leakages. Made by special high precision CNC machines.

Brass Bonnet: High-density forging, no blister, no air holes, no leakages. Made by special high precision CNC machines.

Valve Ball: Smooth and wear resisting, with good sealing performance.

Brass Valve Stem: Made of hot rolled brass, high tensile strength, good toughness, long-term use without deformation, fracture.

Ball Seat: Made by pure PTFE(polytetrafluoroethylene), with high elasticity and wear resistance, is not easy aging.

Handle: Plated with dacromet, the surface is coated against corrosion, the coating is thickened, the thickness is up to 1.3mm, comfortable using.

O-ring: made of imported raw material,special for gas, small friction coefficient, long service life and not easy to leak.

Stainless Steel Locknut: Internal design of anti-loose, can be used for long time.

10Bar Brass Angle Valve Polished Chromed-Plated With Zinc Alloy Handle / Single Way Brass Angle Valve

Description

Working Pressure:10bar (145 psi)

Working Temperature from 0 ℃ to +80 ℃ (from 32℉ to 176℉)

Thread ISO228 (equivalent to DIN 259 and BS2779)

Details

Brass Valve Body: High-density forging, no blister, no air holes, no leakages. Made by special high precision CNC machines.

Brass Bonnet: High-density forging, no blister, no air holes, no leakages. Made by special high precision CNC machines.

Surface: Professionally polished and chrome plated, with nine-level electroplating standards. The surface is as smooth as a mirror, and can be used for long time.

Brass Valve Stem: Made of hot rolled brass, high tensile strength, good toughness, long-term use without deformation, fracture.

Internal: High-precision machining, smooth and non-scalling, is not easy to block, and make the service life longer.

Handle: Made by zinc alloy is exquisite in appearance and unique in structure, which conforms to the human body ergonomics and is long time to use.

Water Inlet: High-precision thread processing, perfect docking with water inlet pipe, silky smooth. Cover: Made of stainless steel, anti-rust, long-term use of the surface is still as new.