Materials: pressure pipe made of PE100-RC (Resistant to Cracks) with an additional external protective layer of thermoplastic material.

Reference standards: EN 12201-2 Annex C - Pipes with peelable layer, PAS 1075 Type 3

Area of use: drinking water networks under pressure, for open trench installation with and without sand bedding, for alternative installation techniques (horizontal directional drilling, relining etc.).

VALROM VALWater multilayer variants, a new generation of HDPE pipes for drinking water networks, has been designed for better handling, storage and installation and lower costs related to these operations. The PE100-RC pipe complies to EN 12201-2, and the additional external protective layer is applied in the extrusion stage (co-extrusion) to protect the pipe from mechanical damage and UV radiation. Due to the high resistance of the PE 100-RC-material to stress cracks, a protective pipe bed zone of sand can be avoided without any loss of safety or durability. The VALROM VALWater multilayer variants is suitable for open trench installation with and without sandbed as well as installation by ploughing and milling.

The metal or stainless-steel wire then can be placed under the protective layer offers the possibility to detect the buried pipe by using a metal detector.

Range: nominal diameter OD 32 ÷ 1,200 mm; SDR 7.4 ÷ 26 (others by request)

Materials: PE100 pressure pipe with an additional external protective layer of thermoplastic material.

Reference standards: EN 12201-2 Annex C - Pipes with peelable layer

Area of use: high-pressure irrigation systems, with conventional installation, that provides better handling and control of irrigation, water conservation through more efficient water delivery methods, and improved energy efficiency through control of peak load electrical use.

Range: nominal diameter OD 32 ÷ 1,200 mm; SDR 7.4 ÷ 26 (others by request)

Materials: Sheet Molding Compound Sheets (SMC)

Resistance classes: A15, B125, C250, D400

CLEAR OPENING: from 282 to 600

A15 – 1,5 tones; B125 – 12,5 t; C250 – 25t; D400 – 40 t.

Particulars: SMC is a homogeneous blend of polyester and glass fiber that offers good reinforcement of the product. By using it, the finished product will have a uniform structure and a very precise surface finish.

Advantages: low weight compared to cast iron; quick and easy assembly, protection against rainfall and flooding; do not corrode or pollute, with a coefficient of very low carbon emissions.

Materials: uPVC - unplasticized PolyVinyl Chloriden, color: RAL BLUE 5015

3 resistance class: R8, R10, R16 - depths till 300 m; Expected life time: 100 years

Area of use: PVC pipes and filters with potable water contact certificate. Thread for joining between pipes and filters/screens. R8 – till 45 m depth; R10 – till 90m; R16 – till 300m. ADVANTAGES: light, easy to handle and to mount; increased free area for filters; sanitary product.

Range: diameters Ø 35 - Ø 400 mm

Materials: stainless stell with PVC

PARTICULARS: Due to the support -pipe, the filter itself may be more flexible, respectively lighter and cheaper than the full metal version. Standard widths of the filter slots are 0.3, 0.5 and 1,0 mm; at request slots with other widths can be performed.

ADVANTAGES: lower costs compared to full stainless stell; fully compatible with PVC pipes; very good usage for agriculture or industrial wells. Expected life time: 100 years

Range: diameters Ø 90 - Ø 400 mm

Material: PE100-RC (Resistant to Cracks)

Reference standards: EN 12201-2, PAS 1075 Type 1

Area of use: drinking water networks under pressure. The VALROM VALWater PE100-RC polyethylene with enhanced resistance to slow crack growth large-diameter pipe system up to 1,200 mm for new construction or rehabilitation in open trenches is suitable for alternative installation techniques (e.g. installation with and without a sand bedding and possible re-use of the excavated soil for installation in open trench as well as installation methods without the use of trenching: horizontal directional drilling, relining etc.). VALROM VALWater PE pipes also offer advantages in large dimensions such as secure welded joints. A comprehensive range of fittings made of PE 100 enables the material-homogeneous construction of transport pipelines.

Range: nominal diameter OD 20 ÷ 1,200 mm; SDR 7.4 ÷ 41

Materials: pressure pipe made of PE100-RC (Resistant to Cracks) with an additional external protective layer of thermoplastic material.

Reference standards: EN 12201-2 Annex C - Pipes with peelable layer, PAS 1075 Type 3

Area of use: drinking water networks under pressure, for open trench installation with and without sand bedding, for alternative installation techniques (horizontal directional drilling, relining etc.).

VALROM VALWater multilayer variants, a new generation of HDPE pipes for drinking water networks, has been designed for better handling, storage and installation and lower costs related to these operations. The PE100-RC pipe complies to EN 12201-2, and the additional external protective layer is applied in the extrusion stage (co-extrusion) to protect the pipe from mechanical damage and UV radiation. Due to the high resistance of the PE 100-RC-material to stress cracks, a protective pipe bed zone of sand can be avoided without any loss of safety or durability. The VALROM VALWater multilayer variants is suitable for open trench installation with and without sandbed as well as installation by ploughing and milling.

The metal or stainless-steel wire then can be placed under the protective layer offers the possibility to detect the buried pipe by using a metal detector.

Range: nominal diameter OD 32 ÷ 1,200 mm; SDR 7.4 ÷ 26 (others by request)

Materials: PE100 pressure pipe with an additional external protective layer of thermoplastic material.

Reference standards: EN 12201-2 Annex C - Pipes with peelable layer

Area of use: high-pressure irrigation systems, with conventional installation, that provides better handling and control of irrigation, water conservation through more efficient water delivery methods, and improved energy efficiency through control of peak load electrical use.

Range: nominal diameter OD 32 ÷ 1,200 mm; SDR 7.4 ÷ 26 (others by request)

Materials: Sheet Molding Compound Sheets (SMC)

Resistance classes: A15, B125, C250, D400

CLEAR OPENING: from 282 to 600

A15 – 1,5 tones; B125 – 12,5 t; C250 – 25t; D400 – 40 t.

Particulars: SMC is a homogeneous blend of polyester and glass fiber that offers good reinforcement of the product. By using it, the finished product will have a uniform structure and a very precise surface finish.

Advantages: low weight compared to cast iron; quick and easy assembly, protection against rainfall and flooding; do not corrode or pollute, with a coefficient of very low carbon emissions.