HYDRA® corrugated hoses

HYDRA® corrugated hoses are formed from seamless or longitudinally welded tubes and are available in a large variety of wall thicknesses, material types, and assembled configurations. They are typically used to provide leak tight connections when conveying fluids / gases either under positive pressure or vacuum. Metal hoses are used to absorb and compensate for static misalignment, dynamic motion, thermal expansion and vibration within pipe systems.

HYDRA® stripwound hoses

HYDRA® stripwound hoses are produced in a continuous process by profiling and winding of a metal strip on to a mandrel. Based on the low degree of process deformation, Stripwound hoses can also be made from a wide range of austenitic, ferritic & non-ferrous materials. Standard materials include stainless steel, zinc plated steel, and brass. Products are also available with additional protective coatings including chromium or nickel.

HYDRA® Corrugated Hoses

Corrugated hoses are manufactured from various materials with a corrugated profile. They are available for diameters ranging from DN 6 to DN 300, up to PN 250 (depending on nominal diameter) and for temperatures ranging from -270 °C up to max. 600 °C.

HYDRA Stripwound Hoses

Primary features of Stripwound hoses include their good flexibility, high resistance to both tensile / crush loads in addition to their basic chemical and thermal stability.

Stripwound hoses are used across wide range of industry sectors that include the measurement and control, communication, medical sectors.

Solar piping

The precisely fitting and ready-to-install components guarantee moderate installation costs and very low operating costs due to simple assembly and long maintenance-free use. This makes the reliable HYDRA solar connectors the preferred choice for OEMs and the installation trade in this market segment.

Areas of Use

Flexible connections between the individual solar panels and the solar equipment piping.

Versions

• Temperature range -20 °C to +250 °C
• Absorption of movement in all directions (axial, lateral and angular)
• Guaranteed alternation of load (min. 10,000 stress cycles)
• Compensation of installation inaccuracies
• Suitable for any application (pressurised and unpressurised systems, major installations, individual panels)
• Connections on standard copper piping

Advantages

• Easy installation without the need for specific knowledge or special tools
• Pre-finished and ready-to-install
• Long-living and extensively maintenance-free operation
• Collectors suitable for close, upright installation
• Compact and inexpensive design
• Fewer sealing points

Characteristics and areas of use

HYDRA expansion joints for gas applications ensure stressfree and safe pipe installation. They absorb system vibrations and movements and thus protect the piping network against damage. Axial expansion joints for gas applications reduce structure-borne sound transmission over the pipeline and avoid vibration and oscillation transmission.

Examples for areas of use

• Drying stoves, gas engines, gas control systems: The absorption of thermal expansion ensures the trouble-free operation of machines
• Gas supply lines or burner supply lines (gas and air): Here, vibrations occurring on all sides are compensated thus ensuring safe and continuous operation.
• Reduction of force and torque transmission in the area of the connection fi ttings

Design and technical data

The expansion joint consists of a multilayered stainless steel bellows. Depending on the relevant case of operation, the bellows is available in the stainless steel materials 1.4571, 1.4541 or 1.4404. The expansion joints are delivered prefinished and assembled with the necessary connectors. The product range includes axial expansion joints with the most current connection fi ttings up to nominal diameter of DN 100.

Quality

HYDRA expansion joints are approved by the DVGW in accordance with DIN EN 30681 for use in the gas industry. Millions of these expansion joints have proven their absolute safety and reliability in practice. HYDRA expansion joints according to DIN EN 30681 with DVGW approval are available in the following nominal diameters:

• Axial expansion joints: DN 15 to DN 500
• Universal expansion joints: DN 150 to DN 500
• Angular expansion joints: DN 50 to DN 500
• Lateral expansion joints: DN 50 to DN 500

Residential Building Ventilation

Modern buildings which are equipped with efficient energy generators and automatic control engineering require controlled room air ventilation due to the high tightness of the construction. This enables targeted air exchange in living areas to guarantee comfort and well-being and extract energy from the exchanged room air.

Flat Duct System

The small duct component program enables flexible, space-saving assembly in walls, floors, and ceilings. The range of dimensions and designs has been selected so that very good adjustment to the required air volumes is obtained and zeta values/current losses are as low as possible.

• galvanised steel plate
• stainless steel and aluminium upon request
• dimensions from 40/100 mm to 80/200 mm
• lengths 1,000 mm to 2,000 mm
• sealed designs possible
• certified in accordance with VDI 6022

Components for flexible pipework

Our components for flexible pipework offer an ideal solution for combining all common duct systems. The self-sealing connecting pieces allow fast and easy assembly of flexible pipes without requiring any additional sealing by means of gaskets.

• galvanised steel plate
• stainless steel and aluminium upon request
• standard dimensions from DN 80 to DN 355
• flat duct dimensions from 40/100 mm to 80/200 mm
• connection for flexible pipes DN 63 to DN 75
• certified in accordance with VDI 6022

Ventilation pipes and fittings

Our round ventilation system enables the robust and reliable exchange of supply, exhaust and fresh air. They thus ensure optimal air circulation in business, manufacturing and work halls.

• Galvanized steel sheet
• Stainless steel on request
• Dimensions: DN 80 - DN 355
• Spiral ducts up to 3m in length
• Other sizes on request
• All molded parts with lip seals
• Certified according to VDI 6022

HYDRA® corrugated hoses

HYDRA® corrugated hoses are formed from seamless or longitudinally welded tubes and are available in a large variety of wall thicknesses, material types, and assembled configurations. They are typically used to provide leak tight connections when conveying fluids / gases either under positive pressure or vacuum. Metal hoses are used to absorb and compensate for static misalignment, dynamic motion, thermal expansion and vibration within pipe systems.

HYDRA® stripwound hoses

HYDRA® stripwound hoses are produced in a continuous process by profiling and winding of a metal strip on to a mandrel. Based on the low degree of process deformation, Stripwound hoses can also be made from a wide range of austenitic, ferritic & non-ferrous materials. Standard materials include stainless steel, zinc plated steel, and brass. Products are also available with additional protective coatings including chromium or nickel.

HYDRA® Corrugated Hoses

Corrugated hoses are manufactured from various materials with a corrugated profile. They are available for diameters ranging from DN 6 to DN 300, up to PN 250 (depending on nominal diameter) and for temperatures ranging from -270 °C up to max. 600 °C.

HYDRA Stripwound Hoses

Primary features of Stripwound hoses include their good flexibility, high resistance to both tensile / crush loads in addition to their basic chemical and thermal stability.

Stripwound hoses are used across wide range of industry sectors that include the measurement and control, communication, medical sectors.

Solar piping

The precisely fitting and ready-to-install components guarantee moderate installation costs and very low operating costs due to simple assembly and long maintenance-free use. This makes the reliable HYDRA solar connectors the preferred choice for OEMs and the installation trade in this market segment.

Areas of Use

Flexible connections between the individual solar panels and the solar equipment piping.

Versions

• Temperature range -20 °C to +250 °C
• Absorption of movement in all directions (axial, lateral and angular)
• Guaranteed alternation of load (min. 10,000 stress cycles)
• Compensation of installation inaccuracies
• Suitable for any application (pressurised and unpressurised systems, major installations, individual panels)
• Connections on standard copper piping

Advantages

• Easy installation without the need for specific knowledge or special tools
• Pre-finished and ready-to-install
• Long-living and extensively maintenance-free operation
• Collectors suitable for close, upright installation
• Compact and inexpensive design
• Fewer sealing points

Characteristics and areas of use

HYDRA expansion joints for gas applications ensure stressfree and safe pipe installation. They absorb system vibrations and movements and thus protect the piping network against damage. Axial expansion joints for gas applications reduce structure-borne sound transmission over the pipeline and avoid vibration and oscillation transmission.

Examples for areas of use

• Drying stoves, gas engines, gas control systems: The absorption of thermal expansion ensures the trouble-free operation of machines
• Gas supply lines or burner supply lines (gas and air): Here, vibrations occurring on all sides are compensated thus ensuring safe and continuous operation.
• Reduction of force and torque transmission in the area of the connection fi ttings

Design and technical data

The expansion joint consists of a multilayered stainless steel bellows. Depending on the relevant case of operation, the bellows is available in the stainless steel materials 1.4571, 1.4541 or 1.4404. The expansion joints are delivered prefinished and assembled with the necessary connectors. The product range includes axial expansion joints with the most current connection fi ttings up to nominal diameter of DN 100.

Quality

HYDRA expansion joints are approved by the DVGW in accordance with DIN EN 30681 for use in the gas industry. Millions of these expansion joints have proven their absolute safety and reliability in practice. HYDRA expansion joints according to DIN EN 30681 with DVGW approval are available in the following nominal diameters:

• Axial expansion joints: DN 15 to DN 500
• Universal expansion joints: DN 150 to DN 500
• Angular expansion joints: DN 50 to DN 500
• Lateral expansion joints: DN 50 to DN 500