Igniting wood, pellets and other biomass fuels

Introducing the FKK ceramic biomass igniter range, an advance in ignition technology for solid fuels.

FKK Corporation specialises in ceramic hot surface igniters and has many years experience of working closely with customers to develop bespoke solutions for innovative appliance manufacturers. We are a trusted manufacturer of hot surface ignition products to many industry sectors.

These advanced igniters are simply the best for lighting pellet and biomass burners. They use only a fraction of the energy required by hot air fans and ignition blowers and will light all fuel types. Ideal for wood pellets, chips, straw, coal, coke etc.

With a considerably higher temperature, around twice that of traditional metal sheathed products, ignition times are reduced to as little as 60 seconds. This makes them significantly more economical in use.

Ø17mm threaded insert G3/8"

Systems

• Pellet stove
• Pellet boiler
• Pellet burner

Ceramic ignition technology benefits

• A fraction of the energy consumption compared to conventional cartridge or element heater
• Long lasting
• Time to ignition 60~90 seconds
• Tested to 100,000 cycle (in Japanese pellet market for 15 years)
• Easy to install and retrofit
• 1000°C at steady-state temperature
• 100/120/220/240V forward current
• Fully electrically insulated with no exposed electric contacts
• Impervious to oxidation and corrosion
• Fully comply with the CE (TÜV certification), ROHS and REACH (TÜV certification) directives.
• Ignite wood chips, split logs, coal briquettes or other biomass, straw, corn etc.

Complex cable assemblyProduced according to your requirements

Our cable harnesses are fitted with various components such as sensors, switches, fuse holders, capacitors etc. on over 200 different installation boards from 8 to 140 outlets. This means that they can be very diverse.

Your specialist for cable assemblies

A customised drawing and a precise parts list are drawn up for each individual product. Samples including initial sample test reports are produced on the basis of these and series production only starts after successful customer approval.

Fully automatic crimping machines and hundreds of different tools enable us to crimp cables from 0.03 mm² to 95 mm². We also offer the Hotmelt process, a low-pressure overmoulding process with own tool design.

We lay each cable set on customised installation boards before delivery to ensure that the product is complete and functional.
100% final inspection and traceability is a must for us.

Igniting wood, pellets and other biomass fuels

Introducing the FKK ceramic biomass igniter range, an advance in ignition technology for solid fuels.

FKK Corporation specialises in ceramic hot surface igniters and has many years experience of working closely with customers to develop bespoke solutions for innovative appliance manufacturers. We are a trusted manufacturer of hot surface ignition products to many industry sectors.

These advanced igniters are simply the best for lighting pellet and biomass burners. They use only a fraction of the energy required by hot air fans and ignition blowers and will light all fuel types. Ideal for wood pellets, chips, straw, coal, coke etc.

With a considerably higher temperature, around twice that of traditional metal sheathed products, ignition times are reduced to as little as 60 seconds. This makes them significantly more economical in use.

Ø17,7mm Ceramic-flange

Systems

• Pellet stove
• Pellet boiler
• Pellet burner

Ceramic ignition technology benefits

• A fraction of the energy consumption compared to conventional cartridge or element heater
• Long lasting
• Time to ignition 60~90 seconds
• Tested to 100,000 cycle (in Japanese pellet market for 15 years)
• Easy to install and retrofit
• 1000°C at steady-state temperature
• 100/120/220/240V forward current
• Fully electrically insulated with no exposed electric contacts
• Impervious to oxidation and corrosion
• Fully comply with the CE (TÜV certification), ROHS and REACH (TÜV certification) directives.
• Ignite wood chips, split logs, coal briquettes or other biomass, straw, corn etc.

Igniting wood, pellets and other biomass fuels

Introducing the FKK ceramic biomass igniter range, an advance in ignition technology for solid fuels.

FKK Corporation specialises in ceramic hot surface igniters and has many years experience of working closely with customers to develop bespoke solutions for innovative appliance manufacturers. We are a trusted manufacturer of hot surface ignition products to many industry sectors.

These advanced igniters are simply the best for lighting pellet and biomass burners. They use only a fraction of the energy required by hot air fans and ignition blowers and will light all fuel types. Ideal for wood pellets, chips, straw, coal, coke etc.

With a considerably higher temperature, around twice that of traditional metal sheathed products, ignition times are reduced to as little as 60 seconds. This makes them significantly more economical in use.

Ø26mm Ceramic-flange

Systems

• Pellet stove
• Pellet boiler
• Pellet burner

Ceramic ignition technology benefits

• A fraction of the energy consumption compared to conventional cartridge or element heater
• Long lasting
• Time to ignition 60~90 seconds
• Tested to 100,000 cycle (in Japanese pellet market for 15 years)
• Easy to install and retrofit
• 1000°C at steady-state temperature
• 100/120/220/240V forward current
• Fully electrically insulated with no exposed electric contacts
• Impervious to oxidation and corrosion
• Fully comply with the CE (TÜV certification), ROHS and REACH (TÜV certification) directives.
• Ignite wood chips, split logs, coal briquettes or other biomass, straw, corn etc.

Igniting wood, pellets and other biomass fuels

Introducing the FKK ceramic biomass igniter range, an advance in ignition technology for solid fuels.

FKK Corporation specialises in ceramic hot surface igniters and has many years experience of working closely with customers to develop bespoke solutions for innovative appliance manufacturers. We are a trusted manufacturer of hot surface ignition products to many industry sectors.

These advanced igniters are simply the best for lighting pellet and biomass burners. They use only a fraction of the energy required by hot air fans and ignition blowers and will light all fuel types. Ideal for wood pellets, chips, straw, coal, coke etc.

With a considerably higher temperature, around twice that of traditional metal sheathed products, ignition times are reduced to as little as 60 seconds. This makes them significantly more economical in use.

Ø17mm threaded insert G3/8"

Systems

• Pellet stove
• Pellet boiler
• Pellet burner

Ceramic ignition technology benefits

• A fraction of the energy consumption compared to conventional cartridge or element heater
• Long lasting
• Time to ignition 60~90 seconds
• Tested to 100,000 cycle (in Japanese pellet market for 15 years)
• Easy to install and retrofit
• 1000°C at steady-state temperature
• 100/120/220/240V forward current
• Fully electrically insulated with no exposed electric contacts
• Impervious to oxidation and corrosion
• Fully comply with the CE (TÜV certification), ROHS and REACH (TÜV certification) directives.
• Ignite wood chips, split logs, coal briquettes or other biomass, straw, corn etc.

Complex cable assemblyProduced according to your requirements

Our cable harnesses are fitted with various components such as sensors, switches, fuse holders, capacitors etc. on over 200 different installation boards from 8 to 140 outlets. This means that they can be very diverse.

Your specialist for cable assemblies

A customised drawing and a precise parts list are drawn up for each individual product. Samples including initial sample test reports are produced on the basis of these and series production only starts after successful customer approval.

Fully automatic crimping machines and hundreds of different tools enable us to crimp cables from 0.03 mm² to 95 mm². We also offer the Hotmelt process, a low-pressure overmoulding process with own tool design.

We lay each cable set on customised installation boards before delivery to ensure that the product is complete and functional.
100% final inspection and traceability is a must for us.

Igniting wood, pellets and other biomass fuels

Introducing the FKK ceramic biomass igniter range, an advance in ignition technology for solid fuels.

FKK Corporation specialises in ceramic hot surface igniters and has many years experience of working closely with customers to develop bespoke solutions for innovative appliance manufacturers. We are a trusted manufacturer of hot surface ignition products to many industry sectors.

These advanced igniters are simply the best for lighting pellet and biomass burners. They use only a fraction of the energy required by hot air fans and ignition blowers and will light all fuel types. Ideal for wood pellets, chips, straw, coal, coke etc.

With a considerably higher temperature, around twice that of traditional metal sheathed products, ignition times are reduced to as little as 60 seconds. This makes them significantly more economical in use.

Ø17,7mm Ceramic-flange

Systems

• Pellet stove
• Pellet boiler
• Pellet burner

Ceramic ignition technology benefits

• A fraction of the energy consumption compared to conventional cartridge or element heater
• Long lasting
• Time to ignition 60~90 seconds
• Tested to 100,000 cycle (in Japanese pellet market for 15 years)
• Easy to install and retrofit
• 1000°C at steady-state temperature
• 100/120/220/240V forward current
• Fully electrically insulated with no exposed electric contacts
• Impervious to oxidation and corrosion
• Fully comply with the CE (TÜV certification), ROHS and REACH (TÜV certification) directives.
• Ignite wood chips, split logs, coal briquettes or other biomass, straw, corn etc.