Kotar’s polypropylene fabric protects styrofoam boards against ingress and provides them with support in proper anchoring of the floor heating pipe fixing clamps. Available in polypropylene metalised fabric.

The best effects can be achieved by using the fabric with Kotar’s styrofoam boards and pipe fixing clamps.

KR system boards are made of EPS and have studs which closely bed heating pipes so that no extra fitting systems are necessary. KR system boards made by Kotar are overlap-joined which eliminates the problem of ‘cold bridges’. Insulation is tighter and thus more effective. Additionally the lock joint facilitates installation. KR/N boards are joined in another manner, with overlay of PS foil.

All floor heating insulation boards in Kotar’s catalogue stand out with their bending and deformation strength as well as stability in a set temperature range. The boards do not only insulate floors. They also make it easier to install the floor heating pipes as they enable the user to keep proper distances between the pipes. Thanks to high production standards the boards are resistant to pressure the floor withstands and protect the pipes against bending. Another advantage is lower cost of screed – the boards to some extent fill the space where floor concrete is poured. Thanks to Kotar system boards the floor heating system works continuously, more efficiently and much longer. Installation itself takes less time and as a result is cheaper.

Kotar’s polypropylene fabric protects styrofoam boards against ingress and provides them with support in proper anchoring of the floor heating pipe fixing clamps

The best effects can be achieved by using the fabric with Kotar’s styrofoam boards and pipe fixing clamps.

• Our product is coated, which makes The fabric the perfect insulation Against moisture.
• On the top side there is an imprint of straight continuous lines forming squares of 10 cm width and dashed lines forming squares of 5 cm width facilitating appropriate distribution of heating pipes.
• Fabric width: - 103 cm ± 2%
• Thickness: - 0,12mm ± 10%
• The fabric is delivered in The form of a ribbon with 50 Running metres in length.

Kotar manufactures floor heating insulation foils to be used in a variety of buildings. The catalogue includes two kinds different in terms of dimensions and strength parameters.

Kotar insulation foils protect EPS boards against moisture from the screed and support the EPS boards to properly anchor the clips fitting floor heating pipes. To achieve best possible results use the foil together with Kotar EPS boards and Kotar pipe fixing clips.

Kotar’s polypropylene fabric protects styrofoam boards against ingress and provides them with support in proper anchoring of the floor heating pipe fixing clamps. Available in polypropylene metalised fabric.

The best effects can be achieved by using the fabric with Kotar’s styrofoam boards and pipe fixing clamps.

KR system boards are made of EPS and have studs which closely bed heating pipes so that no extra fitting systems are necessary. KR system boards made by Kotar are overlap-joined which eliminates the problem of ‘cold bridges’. Insulation is tighter and thus more effective. Additionally the lock joint facilitates installation. KR/N boards are joined in another manner, with overlay of PS foil.

All floor heating insulation boards in Kotar’s catalogue stand out with their bending and deformation strength as well as stability in a set temperature range. The boards do not only insulate floors. They also make it easier to install the floor heating pipes as they enable the user to keep proper distances between the pipes. Thanks to high production standards the boards are resistant to pressure the floor withstands and protect the pipes against bending. Another advantage is lower cost of screed – the boards to some extent fill the space where floor concrete is poured. Thanks to Kotar system boards the floor heating system works continuously, more efficiently and much longer. Installation itself takes less time and as a result is cheaper.

Kotar’s polypropylene fabric protects styrofoam boards against ingress and provides them with support in proper anchoring of the floor heating pipe fixing clamps

The best effects can be achieved by using the fabric with Kotar’s styrofoam boards and pipe fixing clamps.

• Our product is coated, which makes The fabric the perfect insulation Against moisture.
• On the top side there is an imprint of straight continuous lines forming squares of 10 cm width and dashed lines forming squares of 5 cm width facilitating appropriate distribution of heating pipes.
• Fabric width: - 103 cm ± 2%
• Thickness: - 0,12mm ± 10%
• The fabric is delivered in The form of a ribbon with 50 Running metres in length.