Medium-pressure humidifiers for industrial and civil applications

What continuous-flow water spray humidifiers have in common is that the water volume atomised within the airflow is only slightly greater than the water flow required for the airflow.
The small percentage of unevaporated water is not re-circulated or re-atomised, but is channelled to the wastewater system for discharge.
The humidifier’s injection system therefore constantly operates using fresh water according to the continuous flow principle. The combination of our certified design and the exclusive use of microbially inert materials ensures a continuous hygienic operation.
Our Sprayvap® medium-pressure humidifier complies with all current industry standards.

Our focus is on ensuring the best possible integration into process air applications. By using a SIMATIC-S7, a wide-range of customer requirements can be customised or are already fulfilled as part of our patented control concept.

Sprayvap® can be adapted to any system size meaning that it is always a humidifier which exactly meets your requirements.
The process reliability, control accuracy and high processing quality have already been proven repeatedly by our international customers.
The hygienic innocuousness was tested by an independent third-party and confirmed through the issuance of the certificate for compliance with VDI 6022-1.

Medium-pressure humidifiers

• Pump type: maintenance-free, multi-stage centrifugal pump
• Nozzle type: Swirl nozzle with/without lock function
• Patented control concept

Feature variants

• Available as an installation kit in an on-site empty chamber or with stainless steel housing from Lavair
• Redundant design of the pump station
• Master-slave concept for operating up to 5 humidifiers with one pump station
• Droplet separator available in PPTV, stainless steel or V2A (if required)
• Water meter for determining the water loss ratio
• Pressure compensation tank to ensure fresh water supply in the event of mains fluctuations

Areas of application for continuous-flow water spray humidifiers, implemented as medium-pressure humidifiers

• Especially cost-effective in low to medium increases in humidification (0.1 to 4.0 g/kg)
• Use in fresh air systems with partial recirculation or pure recirculation systems
• Use in clean rooms and in the pharmaceutical and food industries
• Use in larger building complexes with interconnected systems

The Jetvap®-Basic high-pressure system is ideal for use as a humidifier, as well as for adiabatic exhaust air cooling, ventilation and air-conditioning systems.
Highly effective evaporation is achieved due to a constant, optimal spray pattern and the use of an microbacterially inert agglomerator.
Due to a user-friendly design, the agglomerator can be reused over the entire lifetime of the humidifier. Chemical additives such as silver ions, biocides or hydrogen peroxide are not required for operation. All water-conducting components are made of non-corrosive materials such as stainless steel, plastic or ceramic, thus guaranteeing the highest quality!

The hygienic innocuousness was tested by an independent third-party and confirmed through the issuance of the certificate for compliance with VDI 6022-1.

Patented controls – Jetvap® – Modulating

The humidification output is controlled by the integrated frequency converter through the use of an output setting of between 0…100%. Our patented Jetvap® – Modulating control concept serves as the basis for this. The required performance can be delivered either via 0…10 V or alternatively via a Modbus. By modulating the pressure range between 30…70 bar, a control accuracy of ± 0.5 % r.H. can be achieved in the performance range of between 10…100%. In the 0-10% range, a clocked mode of operation is used according to the building management system’s required performance, whereby a control accuracy of approx. ± 7% r.H. can be achieved within the partial load range.

Advantages of Jetvap®-Basic

• Simple and intuitive operating concept
• Low cleaning expenses required to ensure compliance with hygienic operating conditions
• Hygienic operation due to the use of demineralised water
• Very high control accuracy during nominal load operation
• Long-lasting corrosion resistance due to stainless steel design
• Also available with oil-lubricated or water-lubricated pump options
• Also available as an installation kit for your empty housing or with Lavair stainless steel housing
• Also available with buffer tank to ensure availability

Ideal areas of application for the Jetvap®-Basic

• Building services, process air or adiabatic exhaust air cooling
• Especially cost-effective in the case of low to medium humidity increases (0.1 to 6.0 g/kg)
• Humidification capacity can be set between 22.5 kg/h and 1,100 kg/h
• Air velocities between 1.5 m/s – 3.0 m/s

What continuous-flow water spray humidifiers have in common is that the water volume atomised within the airflow is only slightly greater than the water flow required for the airflow.
The small percentage of unevaporated water is not re-circulated or re-atomised, but is channelled to the wastewater system for discharge.

The humidifier’s injection system therefore constantly operates using fresh water according to the continuous flow principle. The combination of our sophisticated design and the exclusive use of microbially inert materials ensures a continuous hygienic operation.

Our low-pressure Netvap® system is specially designed for use where low humidification rates are required during constant operating conditions.
This system is therefore mainly used in adiabatic exhaust air cooling, whereby installation in the duct with its own post-evaporation unit is possible as well as in direct combination with a heat exchanger.

Netvap® can be adapted to any system size meaning that it is always a humidifier which exactly meets your requirements.
The performance can be optimised by adjustment of a number of the installed valve units and tailored to meet the customer requirements.
This ensures efficient and cost-effective humidification at all times of operation.

Low-pressure humidifiers

• Pressure range: 3 to 5 bar
• Pump type: No separate pump, system pressure from demineralised water mains
• Nozzle type: Swirl nozzle with lock function
• Low cleaning expenses required to ensure compliance with hygienic operating conditions

Feature variants

• Water meter for determining the water loss ratio
• Up to 5 control lines for performance optimisation during partial load mode

Areas of application for continuous-flow spray humidifiers, implemented as low-pressure humidifiers

• Especially economical in the case of slight increases in humidification (0.1 to 1.0 g/kg)
• Adiabatic exhaust air cooling, optional use in combination with customer-side heat exchanger
• Installation into an existing housing of an air ventilation system, empty housing provided by the ventilation unit manufacturer or in an optional stainless steel housing produced by Lavair

High-pressure humidifiers for process air and industrial applications

What continuous-flow water spray humidifiers have in common is that the water volume atomised within the airflow is only slightly greater than the water flow required for the airflow.
The small percentage of unevaporated water is not re-circulated or re-atomised, but is channelled to the wastewater system for discharge.

The humidifier’s injection system therefore constantly operates using fresh water according to the continuous flow principle. The combination of our certified design and the exclusive use of microbially inert materials ensures a continuous hygienic operation.

Our Jetvap® high-pressure humidifiers comply with all current industry standards. Our focus is on ensuring the best possible integration into process air applications.
By using a SIMATIC-S7, a wide-range of customer requirements can be customised or are already fulfilled as part of our patented control concept.

The Jetvap® can be adapted to any system size meaning that it is always a humidifier which exactly meets your requirements. The process reliability, control accuracy and high processing quality have already been proven repeatedly by our international customers. The hygienic innocuousness was tested by an independent third-party and confirmed through the issuance of the certificate for compliance with VDI 6022-1.

High-pressure humidifiers

• Pump type: water-lubricated piston pump
• Nozzle type:
  Swirl nozzle with lock function
• Patented Jetvap® modulating control concept

Feature variants

• Available as an installation kit in an on-site empty chamber or with stainless steel housing from Lavair
• Redundant design of the pump station
• Master-slave concept for operating up to 3 humidifiers with one pump station
• Droplet separator available in PPTV, stainless steel or V2A (if required)
• Water meter for determining the water loss ratio
• Pressure compensation tank to ensure fresh water supply in the event of mains fluctuations

Areas of application for continuous-flow water spray humidifiers, implemented as high-pressure humidifiers

• Especially cost-effective in low to medium increases in humidification (0.1 to 6.0 g/kg)
• Use in fresh air systems with partial recirculation or pure recirculation systems
• Use in clean rooms and in the pharmaceutical and food industries
• Use in larger building complexes with interconnected systems

Medium-pressure humidifiers for industrial and civil applications

What continuous-flow water spray humidifiers have in common is that the water volume atomised within the airflow is only slightly greater than the water flow required for the airflow.
The small percentage of unevaporated water is not re-circulated or re-atomised, but is channelled to the wastewater system for discharge.
The humidifier’s injection system therefore constantly operates using fresh water according to the continuous flow principle. The combination of our certified design and the exclusive use of microbially inert materials ensures a continuous hygienic operation.
Our Sprayvap® medium-pressure humidifier complies with all current industry standards.

Our focus is on ensuring the best possible integration into process air applications. By using a SIMATIC-S7, a wide-range of customer requirements can be customised or are already fulfilled as part of our patented control concept.

Sprayvap® can be adapted to any system size meaning that it is always a humidifier which exactly meets your requirements.
The process reliability, control accuracy and high processing quality have already been proven repeatedly by our international customers.
The hygienic innocuousness was tested by an independent third-party and confirmed through the issuance of the certificate for compliance with VDI 6022-1.

Medium-pressure humidifiers

• Pump type: maintenance-free, multi-stage centrifugal pump
• Nozzle type: Swirl nozzle with/without lock function
• Patented control concept

Feature variants

• Available as an installation kit in an on-site empty chamber or with stainless steel housing from Lavair
• Redundant design of the pump station
• Master-slave concept for operating up to 5 humidifiers with one pump station
• Droplet separator available in PPTV, stainless steel or V2A (if required)
• Water meter for determining the water loss ratio
• Pressure compensation tank to ensure fresh water supply in the event of mains fluctuations

Areas of application for continuous-flow water spray humidifiers, implemented as medium-pressure humidifiers

• Especially cost-effective in low to medium increases in humidification (0.1 to 4.0 g/kg)
• Use in fresh air systems with partial recirculation or pure recirculation systems
• Use in clean rooms and in the pharmaceutical and food industries
• Use in larger building complexes with interconnected systems

The Jetvap®-Basic high-pressure system is ideal for use as a humidifier, as well as for adiabatic exhaust air cooling, ventilation and air-conditioning systems.
Highly effective evaporation is achieved due to a constant, optimal spray pattern and the use of an microbacterially inert agglomerator.
Due to a user-friendly design, the agglomerator can be reused over the entire lifetime of the humidifier. Chemical additives such as silver ions, biocides or hydrogen peroxide are not required for operation. All water-conducting components are made of non-corrosive materials such as stainless steel, plastic or ceramic, thus guaranteeing the highest quality!

The hygienic innocuousness was tested by an independent third-party and confirmed through the issuance of the certificate for compliance with VDI 6022-1.

Patented controls – Jetvap® – Modulating

The humidification output is controlled by the integrated frequency converter through the use of an output setting of between 0…100%. Our patented Jetvap® – Modulating control concept serves as the basis for this. The required performance can be delivered either via 0…10 V or alternatively via a Modbus. By modulating the pressure range between 30…70 bar, a control accuracy of ± 0.5 % r.H. can be achieved in the performance range of between 10…100%. In the 0-10% range, a clocked mode of operation is used according to the building management system’s required performance, whereby a control accuracy of approx. ± 7% r.H. can be achieved within the partial load range.

Advantages of Jetvap®-Basic

• Simple and intuitive operating concept
• Low cleaning expenses required to ensure compliance with hygienic operating conditions
• Hygienic operation due to the use of demineralised water
• Very high control accuracy during nominal load operation
• Long-lasting corrosion resistance due to stainless steel design
• Also available with oil-lubricated or water-lubricated pump options
• Also available as an installation kit for your empty housing or with Lavair stainless steel housing
• Also available with buffer tank to ensure availability

Ideal areas of application for the Jetvap®-Basic

• Building services, process air or adiabatic exhaust air cooling
• Especially cost-effective in the case of low to medium humidity increases (0.1 to 6.0 g/kg)
• Humidification capacity can be set between 22.5 kg/h and 1,100 kg/h
• Air velocities between 1.5 m/s – 3.0 m/s

What continuous-flow water spray humidifiers have in common is that the water volume atomised within the airflow is only slightly greater than the water flow required for the airflow.
The small percentage of unevaporated water is not re-circulated or re-atomised, but is channelled to the wastewater system for discharge.

The humidifier’s injection system therefore constantly operates using fresh water according to the continuous flow principle. The combination of our sophisticated design and the exclusive use of microbially inert materials ensures a continuous hygienic operation.

Our low-pressure Netvap® system is specially designed for use where low humidification rates are required during constant operating conditions.
This system is therefore mainly used in adiabatic exhaust air cooling, whereby installation in the duct with its own post-evaporation unit is possible as well as in direct combination with a heat exchanger.

Netvap® can be adapted to any system size meaning that it is always a humidifier which exactly meets your requirements.
The performance can be optimised by adjustment of a number of the installed valve units and tailored to meet the customer requirements.
This ensures efficient and cost-effective humidification at all times of operation.

Low-pressure humidifiers

• Pressure range: 3 to 5 bar
• Pump type: No separate pump, system pressure from demineralised water mains
• Nozzle type: Swirl nozzle with lock function
• Low cleaning expenses required to ensure compliance with hygienic operating conditions

Feature variants

• Water meter for determining the water loss ratio
• Up to 5 control lines for performance optimisation during partial load mode

Areas of application for continuous-flow spray humidifiers, implemented as low-pressure humidifiers

• Especially economical in the case of slight increases in humidification (0.1 to 1.0 g/kg)
• Adiabatic exhaust air cooling, optional use in combination with customer-side heat exchanger
• Installation into an existing housing of an air ventilation system, empty housing provided by the ventilation unit manufacturer or in an optional stainless steel housing produced by Lavair