Air / water heat pumps

Operation: DHW heating and apartment ventilation
Description: It uses the energy of the air from the room where it is installed to heat the sanitary water. Placed a dry place where it does not freeze, preferably near other heating sources, with air temperature
from +7 to +40 ° C and a minimum size of 20 m3. The heat pump captures and returns the air from
which it has already taken heat, back to the room where it is placed. Simultaneously with heating
sanitary water thus cools the room and also removes moisture from it, thus improving it air quality
(additional advantage: basement cooling, storage, laundry drying). Models with integrated allow
spiral exchangers to connect external heat sources (heating boilers, stoves or solar collectors).
Surfice treatment: White powder colored steel coat
Interior of heater: Enamelled, with magnesium anode
Heat exchanger: Enameled steel spiral
Control: Electronic controller with buttons and LED display

Buffer tanks with capacity of 25 to 300 liters

Designed primarily for connection to heating systems with heat pumps. The storage tank in
the heating circuit of the heat pump optimizes its operation by increasing the volume of the
heating system, ensures safe and even flow of the heating medium, eliminates temperature
fluctuations and ensures the need for minimum flow of heating medium in heating systems.
Condensation-preventing storage design allows use in refrigeration systems. Types ZV200
and ZV300 can be equipped with a separate electrical element in the case of the desired
larger volume or for reheating.

Electric water heater

Model: wall mounting
Assembly: under or over the sink
Insulation: polyurethane or styrofoam lining
Surfice treatment: white coat made of injection molded plastic
Boiler-material: plastic polypropylene (model Mini) or enamelled steel with magnesium anode (model Mini P)
Description: They are most suitable for refurbishing old buildings, laundry rooms, kitchens, laboratories
and workshops. The water heater can be converted to the non - pressurised version for one
single water outlet at any time, with proper connection of the mixer tap. This appliances are

Water heater with indirect heating

Model / assembly: Cylindrical / self standing
Insulation: Polyurethane foam
Surfice treatment: White lacquered steel sheet
Kotel - material: Enamelled, with magnesium anode
Heat exchanger: Enamelled steel spiral (1 or 2)
Description: Intended to be connected with central heating systems with heat pumps, solar collectors or other
energy sources. For combinations with air / water heat pumps and water / water VLGM200A2-1
and VLGM300B2-1 heaters are particularly suitable. It is factory installed a backup electric heater
which can only be controlled from an external, parent system, e.g. heat pump controller, oil or gas
boiler ..... or any other controller. Available on two sensor tubes for variable positioning of sensors
to control the DHW system connection with other heating sources.

Air / water heat pumps

Operation: DHW heating and apartment ventilation
Description: It uses the energy of the air from the room where it is installed to heat the sanitary water. Placed a dry place where it does not freeze, preferably near other heating sources, with air temperature
from +7 to +40 ° C and a minimum size of 20 m3. The heat pump captures and returns the air from
which it has already taken heat, back to the room where it is placed. Simultaneously with heating
sanitary water thus cools the room and also removes moisture from it, thus improving it air quality
(additional advantage: basement cooling, storage, laundry drying). Models with integrated allow
spiral exchangers to connect external heat sources (heating boilers, stoves or solar collectors).
Surfice treatment: White powder colored steel coat
Interior of heater: Enamelled, with magnesium anode
Heat exchanger: Enameled steel spiral
Control: Electronic controller with buttons and LED display

Buffer tanks with capacity of 25 to 300 liters

Designed primarily for connection to heating systems with heat pumps. The storage tank in
the heating circuit of the heat pump optimizes its operation by increasing the volume of the
heating system, ensures safe and even flow of the heating medium, eliminates temperature
fluctuations and ensures the need for minimum flow of heating medium in heating systems.
Condensation-preventing storage design allows use in refrigeration systems. Types ZV200
and ZV300 can be equipped with a separate electrical element in the case of the desired
larger volume or for reheating.

Electric water heater

Model: wall mounting
Assembly: under or over the sink
Insulation: polyurethane or styrofoam lining
Surfice treatment: white coat made of injection molded plastic
Boiler-material: plastic polypropylene (model Mini) or enamelled steel with magnesium anode (model Mini P)
Description: They are most suitable for refurbishing old buildings, laundry rooms, kitchens, laboratories
and workshops. The water heater can be converted to the non - pressurised version for one
single water outlet at any time, with proper connection of the mixer tap. This appliances are