Elysee - PP Swivel Fittings

In order to tie together (gasket, back ring, body), Elysee has produced an ergonomic design which allows the installation of flanged adaptors by one single person.

They are suitable for joining high and low density polyethylene pipes conforming to: EN 12201 and adequate Standards

DVGW, ÖVGW, KIWA, WRAS, BV

RANGE: from 50 to 110mm / threaded part: from 1 1/2" to 4"

OPERATING PRESSURE: 16 bar at 20°C

Elysée offers a complete range of mechanical compression fittings designed for conveyance of fluids, gaseous
fuels, compressed air, chemical solutions and slurries under high pressure.
Our mechanical compression fittings comply with all relevant international standards in terms of dimensions
They are also ideal for the conveyance of potable water and fluids for human consumption, since they are
produced in accordance with national and international standards and regulations for health and safety.
To ensure that all requirements of standards and regulations are fulfilled, our fittings are tested regularly and approved
worldwide by the main testing institutes and certification bodies.

Elysée offers a comprehensive range of pipes and fittings, designed for water supply and for buried and above-ground drainage
and sewerage. EN ISO 1452 piping systems are available in a complete range of metric series from Ø16mm to Ø315mm with
pressure rating from 6 bar up to 25 bar. Pipes can be found at straight lengths of 3, 4 and 6 m.
In order to ensure that all requirements of standards and regulations are fulfilled, Elysée’s U-PVC plastics piping systems, are
tested according to standards requirements in our well-equipped testing room.
Furthermore, Elysée EN ISO 1452 piping systems are being tested and certified according to EN ISO 1452, by external third party
certification body (OFI Austria). Product certification has been obtained, ensuring EN ISO 1452 compliance.
EN1452 specifies the requirements for U-PVC piping systems regarding: Materials, Appearance, Colour, Geometrical Characteristics, Mechanical Characteristics, Physical Characteristics, Performance requirements, Specifications for the Sealing Ring.

Can be used secondary line derivation from main lines of PE,
PVC, or PP for irrigation, high pressure conveyance of water,
chemical solutions and slurries.
Clamping part from 20mm up to 315mm diameter and
threaded part from ½’’ up to 4’’ diameter.
The high grade polypropylene material used ensures long
lasting operation under demanding applications.
Excellent resistance to most commonly used chemicals for
such kind of applications.
Suitable for use in potable water supply systems.
Suitable for exposure to sunlight (UV).
Nitrile sealing gasket for excellent sealing performance and
chemical resistance.

In order to tie together (gasket, back ring, body), Elysee has produced an ergonomic design which allows the installation of flanged adaptors by one single person.

They are suitable for joining high and low density polyethylene pipes conforming to: EN 12201 and adequate Standards

DVGW, ÖVGW, KIWA, WRAS, BV

RANGE: from 50 to 110mm / threaded part: from 1 1/2" to 4"

OPERATING PRESSURE: 16 bar at 20°C

Elysée offers a complete range of mechanical compression fittings designed for conveyance of fluids, gaseous
fuels, compressed air, chemical solutions and slurries under high pressure.
Our mechanical compression fittings comply with all relevant international standards in terms of dimensions
They are also ideal for the conveyance of potable water and fluids for human consumption, since they are
produced in accordance with national and international standards and regulations for health and safety.
To ensure that all requirements of standards and regulations are fulfilled, our fittings are tested regularly and approved
worldwide by the main testing institutes and certification bodies.

Elysée offers a comprehensive range of pipes and fittings, designed for water supply and for buried and above-ground drainage
and sewerage. EN ISO 1452 piping systems are available in a complete range of metric series from Ø16mm to Ø315mm with
pressure rating from 6 bar up to 25 bar. Pipes can be found at straight lengths of 3, 4 and 6 m.
In order to ensure that all requirements of standards and regulations are fulfilled, Elysée’s U-PVC plastics piping systems, are
tested according to standards requirements in our well-equipped testing room.
Furthermore, Elysée EN ISO 1452 piping systems are being tested and certified according to EN ISO 1452, by external third party
certification body (OFI Austria). Product certification has been obtained, ensuring EN ISO 1452 compliance.
EN1452 specifies the requirements for U-PVC piping systems regarding: Materials, Appearance, Colour, Geometrical Characteristics, Mechanical Characteristics, Physical Characteristics, Performance requirements, Specifications for the Sealing Ring.