Airios

About us
Airios,
As a specialist in controllers, we develop and produce (custom made) electronics and software for ventilation and heating systems. Our sustainable products are mainly used in the residential market and in the light commercial buildings market. We supply to original equipment manufacturers who, like us, demand the very highest quality standards.
The focus of our products is on:
Comfortable living for everyone, with minimal noise from ventilation systems.
Ventilation only where and when necessary in certain rooms.
Smart living, where all technologies and installations inside a building communicate with each other, exchange information and learn from each other.
In addition to this core business, as market leader we are committed to putting ventilation high on the EU agenda. With the aim of becoming more energy efficient and reducing energy waste. With this sustainability mission, we are committed to clean indoor climates, created as comfortable, healthy environments for everyone. We are pursuing this goal with a passionate dedication to technology, to the world around us, and to all future generations.
Our comfort, a notch above
Our innovative products and solutions give us complete control over sustainable and comfortable indoor climates. Both for residential and commercial buildings. We set high standards when it comes to ultra-clean air, low energy consumption, and optimised user friendliness. In other words: we pursue comfort par excellence.
Our solutions
Nothing is impossible. It is from that open-minded spirit that we innovate every day at Airios. We work together with our partners to identify their needs and anticipate future developments.
We incorporate existing products, while also creating customer-specific solutions. We are proactive and forward-thinking. We address tomorrow’s needs.
We test and fine-tune. We produce and assemble. And in the end, our solutions also enhance insight into data through our cloud and app solutions. Poised to offer the world ultimate comfort.
Our products
Our multidisciplinary team of specialists are pioneers in developing the best possible products. In this process, we use a variety of simulation options and advanced testing technologies. This is how we help our customers market their products faster, more effectively and cost-efficiently.
Our core values:
Airios is where people and technology converge. With technology as our passion and human prowess as our innovative strength. In our close-knit team, we challenge each other and bring out the best in each individual. The proof of our decades of success in this endeavour is reflected in our constant growth. We consistently achieve this by upholding the following core values:
Ambition, Leadership, Accessibility, Surprise, Try & improve and Enjoyment
Airios introduction
Our product groups
Our application areas / Solutions
Keywords
- Heat recovery unit
- Mechanical exhaust ventilation
- Balanced ventilation
- Ventilation user interface
- Ventilation controller
Our Products

User interface module for ventilation
User interface module VMN-02LM04
The User Interface module is a device to control ventilation systems in a residential environment but could be used for other applications also. The typical application is to turn on the ventilation system to extract/refresh a certain amount of air in a closed space. Each button represents certain air volume refreshment or a timer functionality.
The LED can indicate feedback that the ventilation system did receive the command but also feedback of the ventilation system on errors will be communicated via the LED.
As it is on batteries and wireless there is no need to pull wires. It is very thin and can be placed anywhere on the wall, even next to existing light switches as it fits in with current switch gear.
FEATURES:
- 4 metal dome buttons
- Standard in line with PEHA Aura white switch gear
- Fits many other switch gear manufactures
- Fits almost every flush mounted wall box in Europe except for UK. We have a separate for Italy.
- Thin and can be placed anywhere on the wall with screws or double-sided tape
- RF communication with other equipment
- Easy installation, no wires by use of RF
- 1 two color LED Red/Green for error and status
indication - Battery powered
Up to 6 years without battery change. The RF 4 button user interface gives you simple control over the ventilation. This can be an add-on to your existing RF system or it can be the main user interface for the ventilation system.

Heat recovery unit controller (VMD)
SYSTEM CONTROLLER FOR RESIDENTIAL VENTILATION SYSTEMS.
The Heat Recovery Unit (HRU) ventilation platform products gives you the flexibility to make different
solutions for your ventilation systems. For a basic system set up but also for more advanced systems.
APPLICATION
The PCB can be used for central residential heat recovery. The platform is set up to make more economic standard systems up to high valued systems. Two fans can be connected via PWM or Modbus (VMD-02RMS37-2) which will be controlled based on the software application of the
PCB.
OPTIONS
The PCB is prepared to support most of your requirements. A standard implementation can be
4 temperature sensors, a bypass valve control and wireless control via sensors, wireless display or manual controls. The options can be set On or Off in a setting production tool (separate available). A cable is required to connect the dp flow sensors to the VMD. For higher quantities, customization of hardware and software is possible.

Relative humidity sensor
Relative humidity sensor VMI-02MH05
The sensor module is a device to measure air quality in a residential environment. The typical application is to measure indoor humidity in wet rooms and send this via RF to a ventilation unit.
The ventilation unit can react on the information from the sensor accordingly.
With the capacitive button a manual control function can be selected.
FEATURES:
- Flush mounted sensor
- Humidity measurement of indoor air quality (IAQ)
- RF communication with other equipment
- Easy and fast installation, RF technology
- Capacitive button for manual control
- 4 green LED’s + 1 three colour LED for status indication
- 230 VAC powered
- Fits most round and square EU flush mount boxes
The flush mounted sensor module gives you the flexibility to make different solutions for your ventilation systems. It is now easy to make a demand controlled ventilation (DCV) system by using using humidity sensors.

Room CO2 sensor
Sensor module VMS-02MC05
The sensor module is a device to measure air quality (CO2)in a residential environment. The typical application is to measure indoor air quality (IAQ) and send this via RF to a ventilation unit. The ventilation unit can react on the information from the sensor accordingly.
With the capacitive button manual control functions can be selected.
FEATURES:
- CO2 sensor measurement of indoor air quality (IAQ)
- RF communication with other equipment
- Easy and fast installation, RF technology
- Capacitive button for manual control
- 5 LED’s + 1 two colour LED for status indication
- 230 VAC
The flush sensor module gives you the flexibility to make different solutions for your ventilation systems. It is now easy to make a demand controlled ventilation (DCV) system by using CO2 sensors.

IVY display
Smart air quality control with Airios IVY.
Optimize your indoor climate with the IVY range from Airios.
With the IVY product line, Airios introduces a new system that brings air quality and comfort in residential homes to the next level. The IVY system is designed to monitor and control air quality and temperature in each room of your house.
Multiple sensors measure temperature, relative humidity, carbon dioxide and particulate matter to efficiently control your heating and ventilation system and provide insights in your indoor air quality and energy consumption as well.
IVY control devices support a wide range of heat recovering ventilation systems and heat pumps to meet and exceed the next generation sustainable building regulations. The high-quality product design and compatibility with smart home systems makes the IVY system a perfect fit for any house.
IVY Home is the central product in the IVY product line, which controls ventilation, heating and cooling in residential and light commercial buildings.
The high-resolution display provides a userfriendly interface which gives full control of ventilation and comfort conditions in every room of your house. Four integrated sensors, temperature, relative humidity, carbon dioxide and particulate matter, measure the air quality and are used to automatically control the ventilation system and heat pump.
We are all aware that gaining insights in air quality and energy efficiency is becoming more and more important. That is exactly what IVY Home does by providing easy understandable air quality and energy graphs through its user interface.
FEATURES OF IVY HOME:
• Complete home ventilation and heating control
• High quality blend-in design
• High resolution touch screen display
• Status bar and notifications
• Week, vacation, and automated programs
• Multi zone heating, cooling and ventilation
• Smart Home integration and control
• Wireless bridge and cloud gateway
• Professional services platform
HOW TO CONNECT?
OpenTherm®
MODBUS RTU
As the central device of the IVY system, IVY Home connects to indoor sensors, actuators, room controllers, heating and ventilation systems, smartphone apps and cloud services.
IVY Home connects to other IVY products via the Airios wireless protocols or wired bus. Third party ventilation units and heat pumps connect via the on board OpenTherm® or MODBUS RTU interface or via external on/off relays or 0-10 V interface modules.
Airios cloud service and smart home applications connect via Wi-Fi and Matter. The installer smartphone app uses BLE for maintenance and commissioning.
APP FOR INSTALLATION
The IVY installer smartphone app guides the installer through the setup process to minimize installation time and prevent errors. The app loads different language packs for most European languages, and it loads OEM custom settings for the IVY Home.
During the installation and commissioning process, the app saves parameters which are relevant for quality reports that are being used for future references.
EXPANSION OF THE IVY PROGRAM
The IVY Home controller is the first product of the IVY product line and is the central controller of the home typically positioned in the living room. For the other rooms there will be separate controllers.
The IVY Room is a small control display with built-in sensors that is used for multizoning. Each room can be set separately in terms of comfort. For the bathroom and kitchen there will be IVY Sense sensors. These sensors typically measure relative humidity and temperature. The IVY Room and IVY Sense will become available in a mains powered and a battery powered variant.