Using the AGS 20 and AGS 10 rinsing device, transmission oil can be replaced without problems and the transmission can be cleaned out in the same working cycle. It works without using additives. During the cleaning process, only heat and flow speeds ensure that dirt accumulations are flushed out into high-performance filters.

Renowned oil manufacturers are critical of the basic principle of transmission „filling for life“. The durability of the oil is only seldom defi ned and published by the automobile manufacturers. Changing of the transmission oil after a certain mileage is therefore recommended.

However, simply draining off and refilling is not sufficient. This is because only part of the old transmission oil is removed. Up to 60% remains in the converter and in various supply lines.
With the AGS 20 an AGS 10, a half-hearted working cycle becomes a complete one: The oil change is supplemented with transmission fl ushing

The AGS 10 is the "little brother" of the AGS 20, it has a high performance filter, high-quality plastic tanks and is built a little bit more compact.

Robust steel constrction

Mechanical operation of the transmission flushing: no software and electronics needed

Flushing without additives (important for warranty reasons)

CLEAN, SAFE, QUICK: PROBLEM-FREE BRAKE LIQUID REPLACEMENT
WITHOUT COSTLY BRAKE FLUID TRANSFER.

The brake maintenance devices of the Perfecta series in three different sizes and designs are suitable for every workshop.

The portable (Perfecta 4-plus) or mobile (Perfecta Perfecta 20-plus and 60-plus) devices are best known for their reliability and high functionality.

They are ABS compatible and provide a one-man operation. No decanting necessary: ​​the brake fluid is taken directly from original containers to 5, 20 or 60 liters and promoted by a hydraulic pump in the brake system.

With the optional exhaust system "Plus" the reservoir can be emptied before filling with new brake fluid.

Mobile and portable devices, 5 Liter up to 60 Liter

Compatible for ABS

Plus-Option: separate suction pump for emptiing the reservoir before filling the new brake fluid

The EasyLift makes wheel changing considerably easier.

Wheels weighing up to 60 kg can be replaced rapidly and far less strenuously.
The EasyLift is the quickest device on the market thanks to its high raising and lowering speeds. The wheel remains movable thanks to a mounting fi tted with ball-bearinged rollers. The lifting device works with compressed air, and an innovative, patented mechanism for fine adjustment of the working height enables precise wheel fitting. The EasyLift remains mobile at all times thanks to its trolley. A well thought-out storage system for bolts, hooks for the manual tyre inflator and a hanger for the torque wrench ensure tidiness at the
workplace.

optional extension set:
A crossbeam with balancer enables fatigue-free work with the impact wrench on the wheel. The holder ensures that the device does not get in the way when it is not being used.

Wheel assembling for cars

Fast and easy wheel changing without exertion

Wheels up to 60 kg.

Pneumatic operation

Patented air suspension

The fastest device on the market

Gearbox Lifter Profi Jack 600

GL transmission lifters are characterized by their robustness, compact size, and unique rapid lifting feature. This rapid lifting can even be applied under full load. Operation is done using a standard cordless screwdriver. The lifting speed is exceptionally fast. An anti-twist mechanism prevents the office chair effect during the movement of the load-carrying device.

MADE IN GERMANY:

• Chassis with 4 swivel castors, two of them being braked
• Foot pedal for fine lifting
• Foot pedal for lowering, keeping both hands free
• The piston rods are lubricated with oil with every lift – Rust protection
• Cathodic dip coating (KTL) for optimal rust protection

Filling Devices for AdBlue® for the workshop

In two sizes, with a 210 liter and a 60 liter container, the newly revised Filling Devices for AdBlue®, together with the IBC Device, are presented at the automechanika as a fair novelty. The GL Profi-Line edition with an innovative and patent protected technology ensures that ALL car tanks can be filled clean, quickly and without dripping.

In addition, GL presents a variety of economical devices, named “Basic Line”, for small workshops.

Disposable Filling Hose for AdBlue®
AdBlue® can be quickly refilled from the canister into the car‘s AdBlue® tank drip-free, using the patented filling hose which has been designed as a disposable solution for use on the road.

Since AdBlue® tanks in diesel cars are becoming smaller, refilling between service intervals becomes more and more likely. Since no AdBlue® is allowed to enter the vehicle interior or contaminate the drivers clothing during refilling, the filling hose is a clean solution. It means that the car driver himself can carry out the refilling.

Workshops are therefore presented with excellent possibilities for marketing the filling hose together with the AdBlue® liquid itself.

AdBlue Suction Pumps
Residual liquid can be sucked out of the AdBlue® storage tank in a car using the suction pumps, available in two sizes and performances. Since the durability of the urea solution is limited, replacement is prescribed for every service.

All components in the pumps are 100 % resistant to AdBlue®.

The heavy-duty housings are made of stainless steel. The pressure and suction hoses are made of silicon and fitted with a ball end made of stainless steel at each end.

 

Filling Devices for AdBlue®

Devices for IBC container or 60 Liter container or 210 Liter container

Automatic shutdown when the tank is full

Extraction of the remaining fluid in the hose

Drip-free decoupling

Quick and clean filling in two speeds