Innovative and efficient heating

The Qwikshift Hybrid heater is the latest solution for sustainable heating of industrial buildings, shops and warehouses. A heat pump, combined with an innovative booster technology. The system consists of three parts: heat pump, the indoor unit with a heat booster either on gas or electric, and the Smart Controller.

The room is brougth up to temperature quickly by the booster which also jumps in on the coldest days of the year. 70% of the year the heat pump can do the work alone, and during the other 30% the booster helps to reach the desired room temperature. Sustainable and efficient heating with high employee comfort. Even during the summer as the Qwikshift can also be used for cooling when combined with a heat pump as a heat source.

This hybrid heating system reduces energy consumption, minimises carbon emissions and is hydrogen ready (20%).

Check it out at https://www.qwikshift.nl/en

The WWH is an indirect fired unit air heater that can heat a room optimally because of the sophisticated design and a thought through combination of fan, heatexchanger and discharge possibilities. The WWH can be connected to any central heating system, heat pump or district heating system and is suitable for heating any kind of area, such as showrooms, warehouses, factories and bigger commercial properties.

The WWH-range consists of 4 different series with their own unique characteristics: WWH-basic unit for heating with standard water temperatures, WWH - EC with low electricity consumption and very silent, WWH-LT for extra capacity with low water temperatures, and the WWH-Plus for heating with low water temperatures ánd cooling in the summer.

Heating of high areas is a challenge? Not with the Winterwarm JET. This air heater is
specially designed to transport warmth from underneath high ceilings downward toward
the floor and to keep it there. The unit is equipped with an air discharge module with
special nozzles that move 7 to 10 times more air than a unit without a discharge module
would do. This way, the warm air is efficiently spread downward in four directions.

The temperature difference between the ceiling and the floor remains minimal so heat loss through the roof is reduced as much as possible. This way energy savings up to 30% can be realised while maintaining comfort. Suitable for areas between 5 and 16 metres heigth. Especially designed for optimal operation with low water temperatures, like in combination with a heat pump or district heating.

A complete generation condensing unit air heaters which combines the efficiency of gas fired unit air heaters with energy savings and high comfort. All Winterwarm HR heaters are ErP-compliant.

The HR heaters are provided with new innovative controling technology which enables the heaters to be connected to a BMS, to combine different applicances, to be controled by mobile device, status read out from a distance, etc.

• High efficiency
• ErP 2021 compliant
• 9 capacities 10-120 kW
• Modulating burner and fan
• Energysaving
• Compact
• Low weight

The Winterwarm ACM air curtain is a perfect solution to separate a heated area from the outside or another building which is not heated. The heat loss is reduced significantly when an ACM is installed. Every ACM has a innovative "Gurney"-flap. This flap guides the air flow in such a way that the majority of warm air stays within the heated area.

The ACM is a modular air curtain assembled of units of 50 cm. Creating a perfect seperation between the warm inside air and the cold, polluted outside air.